IP Telephony and Phones

Resolved! User Speed dials on phone not showing up in CM

We have found that users can do a long press on their 8811 and 7841 phones and are able to program speed dial buttons regardless of what is programmed for that button in CM. For instance we have a user that has an 8811 phone and her template only ha...

8821 Dropping Registration

We purchased several 8821s to start replacing our aging fleet of 7925G phones. The 7925G's work great, but unfortunately the 8821s are experiencing horrible issues. They randomly drop registration and will not pick back up. This happens whether or n...

CME 10.5 CP-8841 SIP and pickup SCCP

Hello i have the following problem: The users with sccp phones can pickup all the incoming calls. The users with SIP phone CP-8841 cannot pickup calls from sccp phones. Because the 10.5 CME does not support cp-8841 i have tried to work with "compatib...

Resolved! CME- How can i make outgoing PSTN calls only with a key like FAC (in cucm)

I would like to know if it is possible to assign something like FAC (Forced Authorization Code in CUCM) for each user in a call manager express enviroment to make outgoing PSTN calls. if the user does not have a key, he cannot make outgoing PSTN call...

CUCME : PIN Code per user : Is it possible? how to?

Hi,Is it possible to configure PIN Code per user four outbound calls dial-peers?If yes how to, is there any documents that i can read?Best regards,Antra

Passive PoE?

We would like to use passive PoE for Cisco CP-7821 IP phones in a special application. Edit: By passive PoE I mean applying voltage without the standardized protocol that determines device class etc before the application of 48V. 1. Does the phone su...

Blind Transfer to external with originating phone number

Our customer would like to have implemented the following.User A calls from external to user B. User B answers the call. User B performs a blind transfer to user C. User C is also external. User C will display the phone number of user B, even after t...

Resolved! CUCM Could not complete transfer to hunt group error

We have and have a hunt group setup that has been working just fine until recently it is set up to have a queue of 20 or so people and play a message if they are entered into the queue. When our operator attempts to transfer to the group and there is...

Call failure after installing ASA firewall.

HelloCurrently, an ASA firewall is installed in front of the H.323 Gateway.After installing the firewall, calls cannot be made during a call. All firewall policies are allowed.When talking on the phone, it is disconnected after a few seconds without ...

Cisco CP-7925 Phones - Status "none" IP Address "none" phone calls work

We have a growing group of 7925 phones that are showing "none" and "none" for status. However, phone can be pinged and replies, can make calls and take calls. What does not work is a third party messaging application that uses an IP Phone Service to ...

Resolved! Headset 561 IP Phone 7941

Hello everyone. We just bought a Cisco 561 headset. The headset itself works great since you can connect it to a computer via USB. But, we have a Cisco IP phone 7941 running 9-4 firmware. When this headset is plugged into that phone it doesn't seem t...

call logs on shared line

hi Guys, one of my clients wants to know if call logs (received/missed) can be synced between devices which share the same extension.as far as i know, there is an option for "log missed call" which logs missed call. but it would not do received call...

Resolved! Unity Connection Language to caller is not playing the default one

Hi All, Issue: +++++++++ 1. When callers call the numbers in the site they are hearing English langauge. 2. When they are calling internally French language is heard. 3. While users try to call mailbox they are hearing French. This is not working fr...

Resolved! VG450 Analog Gateway

Dear Experts I have a doubt here please clear those below . I have 60 users with analog phones and old PBX system with 8 FXO lines from ISP, customer don't want to replace analog phone,, VG450 can act as a standalone CME directly terminating the FXO ...

cdr service restart

Hi,What is the procedure and how to do from gui .There are so many method people are describing .is there any document Thanks

IP Telephony and Phones

Forum Posts

Resolved! User Speed dials on phone not showing up in CM

8821 Dropping Registration

CME 10.5 CP-8841 SIP and pickup SCCP

Resolved! CME- How can i make outgoing PSTN calls only with a key like FAC (in cucm)

CUCME : PIN Code per user : Is it possible? how to?

Passive PoE?

Blind Transfer to external with originating phone number

Resolved! CUCM Could not complete transfer to hunt group error

Call failure after installing ASA firewall.

Cisco CP-7925 Phones - Status "none" IP Address "none" phone calls work

Resolved! Headset 561 IP Phone 7941

call logs on shared line

Resolved! Unity Connection Language to caller is not playing the default one

Resolved! VG450 Analog Gateway

cdr service restart

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

A new chapter of the Spotlight Award begins!

Join us in Celebrating the New Year and the Nov.-Jan. Winners!

Announcing Resources That Guide You to Success

Cisco Headset 562 with IP Phone 7965

Attendant Console Standard - No Errors but No Calls

Connecting a unify phone to the LAN port of access point c9105axw-e

C8200 : Outbound Calls Drop

Using LSC for WLAN EAP-TLS on Wireless Phone 840/860

No ringback tone for external caller when using g722-64

one destination-pattern to match 3 call patterns

CUBE what does "Maximum SIP Trunk Sessions" mean ?

CUCM Subscriber loses connection to Publisher how to route

where to find ,,keepalive'' current value in CUCM