Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,I have the following case:PSTN Phone -> 2811 MGCP BRI -> CM6.1 -> CUE AA -> CM6.1 Hunt-GroupI'm just doing simple scenario with web integrated script editor. When user presses 1 it redirects the call to hunt-group. The memebers in the group rin...
Hello. A quick question regarding call park in v.7.1. How can I extend the length of time that a call can be parked? on v4 we had 3 minutes approx, however right now on 7.1 we are only at 1 minute. Thanks for your help.
do WIRELESS PHONES, CP-7921G can register with ccm as 79xx model or do I need any special configuration to get register with ccm.
Hi,I have a Cisco 2851 running CME. We've been experiencing a random problem where inbound calls do not ring the IP Phones (around 1 call in 200 inbound calls). To troubleshoot this TAC have requested I enabled detailed ephone debugging. To capture t...
Hello,Sometimes we are unable to enable/disable Filter or DivAll from assitant console and get the error message "failed to set Filter" or "failed to set DivAll".When this happens, we used to restart IPMA et TOMCAT services as workaround.Below some t...
Recently I installed 3 new cisco phones with internal and external extentions.There is no difference in the configuration but I have got a problem: if I am trying to dial to thease phones if nobody pick up one call is dropping after second ring.Any a...
I am having problems with getting caller id to show up on pstn incomming calls. The IOS version is c1700-sv8y-mz.122-15.zj3.bin. I have researched caller-id and it requires that "caller-id enable" be set under the voice-port, however the command is n...
hi,we have one call manager 4.x and morethan 1000 phones.there was no partiition configured for the phones.even for route pattern there was no partition specified.it was open for all to dial outside call.now if need to block outside diallign in som...
Dear Cisco gurus,My client wants Automatic Recording (24x7) on their new Cisco CUCM 7.1 network. Is there any official list of 3rd party Voice Recording solution that is supported by CUCM 7.1?? Would be great if you could provide the brand name and...
Hi,I have deployed a CallManager 6.1 cluster with several H.323 gateways for access to the PSTN.Inbound and otbound calls work ok with standard phones (7965, 7941 and 7911) however I am having problems with outbound calls from 7985 video enabled phon...
I have a Call Manager 4.2 Cluster and we are having some issues with the subscriber.All phones are on subscriber and pub is on backup. Some services suddenly stopped working like TCD, TFTP & RIS so tried restarting them but no use so restarted the se...
Dear AllI want to know about gatekeeper license?is this just 60days eval?please hint me
We have CUCM 6.13.1000-16.We are having a problem using SSL during LDAP directory and end user authentication. Does SSL also require certificate on the client (CUCM server) site to work? If yes, where can I can more information for the requirements?O...
I wanted to save one slot in my 2621XM - this is one of main reasons I have bought VWIC-2MFT-E1 instead of 2 one-head controllers. Also I installed 1 AIM-VOICE30. (I need 2 e1 PRIs with only 16 timeslots in each)I have 2 E1 links, first - from my tel...
Is it possible to leverage an MGCP gateway with a fractional Digital T1 CAS?
