Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have CCM 5.1.3. When I try to add a new 7937 phone, I do not see it under add new devices. I can 7936 etc, but 7937..Thanks....
Hello,I have been instructed to setup call translations to force office to office calls over the WAN as much as possible. I have my tranlation pattens set up to redirect calls on net for the DIDs that we own. What I'm having a problem with is settin...
In the configuration guide it states that the mobility softkey when not in a call can be used to disable or enable the mobile connect feature. However, this softkey is not working. All the other things are working fine. The user has to enable/disable...
I hope someone can help me with this one... A few days ago we received a new 7937G. I installed the required s/w on CM, restarted the CM tftp-server, connected the 7937G to a POE port and.. it worked. That is, when calling/being called from an IP-pho...
Hi,we are experiencing call drops, but only from particular numbers (provider). This happens intermittently and only on incoming calls from outside over a SIP trunk.When collecting traffic we can see that Cisco 2811 is sending "200 OK SDP" events tow...
Hi All,I am trying to install CUCM 6.0 on HP DL 380G5 for lab purposes.Specifications Intel Xeon Processor @ 2.33 Ghz2GB RAM DDR2Physical Hard Drive 1, Controller Slot 1 73.4 Gbytes 10K RPM Physical Hard Drive 2, Controller Slot 1 73.4 Gbytes 10K RPM...
Hi all,I need some advice. we are carrently having a callmanager 6.1 at the head office and we need to have either a call manager express on the DR site or configure SRST at the remote DR site ISR. what will be the best practice? the plan is that sho...
Hi all,we have integrated Cisco Unified presence version 6.x with CCM 6.xFrom the IP phones we are able to send short text messages to other IP phones which have been added in contacts list . The problem is that the receiver IP phone receives the me...
Hi,can anyone advise me or point me to a reference that will tell me how many IP Phones a router can support with DHCP services ?Clearly a 3845 should be able to support more concurrent DHCP lease requests than an 1800 but I cannot find any data to s...
Hi AllOur AS5850 just went down, when it came back up again, log files as follows:Any Ideas?
Hi All,We are facing a problem on ports openings between a central site and branch locations.My CUCM and IPCC servers are in location A and my VG is in Location B in between we are using forigate firewall.If all the ports are opened i can able to mak...
Hello,I have been doing telephony work for a long time, and recently been assigned Cisco's product line in VoIP. (the powers that be thought it was a good match considering I am also the network engineer)On most voicemail systems there is a login fea...
I have a fresh install of UCM 7.0.2, not from an upgrade. I'm trying to get Attendant console running. Will this work or does it have to be a system upgraded from a previous version for attendant console to work?ThanksJustin
I would like to run a report to see what phones are forwarded to where. Possible?
I have a three server CUCM deployment running 6.1.1. I am upgrading to 6.1.3.I currently have 6.1.3 installed on all three servers' inactive partitioin.I understand I need to reboot the pub in the new version, wait 10 minutes or so, then do same pro...
| User | Count |
|---|---|
| 4 | |
| 4 | |
| 2 | |
| 2 | |
| 1 |
.jpg "VIP Expert"){kind=icon}
