IP Telephony and Phones

Hi,I have CCM 6.1.2..Whenever i do "Call-Forward" from an IP Phone it works as per my requirement like if the user has LANDLINE calling privilege, then he/she can forwards it to the landline....But the problem i am facing is: after a period of time (...

pls,i need to configure something like a auto attendant, i have a cucmbe 7 with unity connection 7, how i can do it, step by step!!!thanks

cannot get a dial tone unless its on the speaker button.CCM version is 4.1.3 and phone type is 7941.Pls help me out what to do to solve this problem...i tried out what ever options i can..but no use so pls assist me....

Is there a way to make a button that displays which call parks have calls on them? (not directed call park, we are using the dynamic)

I'm trying to setup DIrected Call Park with BLF appearance in CUCM 6. I have the Directed Call Park working the way I want, but I cannot get the BLF to light up correctly. The documentation indicates that I can setup BLFs for Directed Call Park num...

I've configured a phone with feature buttons via the Reorder Phone Button Configuration page. Following the reset, I get an icon next to the button (the correct icon for the feature), but the label for all of them is 3 question marks. I can't find an...

we allowed user to call a branch office with the last four digits via a route pattern then prepend 6 digits via"Prefix Digits (Outgoing Calls)" on CM. Calls are routed to MGCP GW on a T1 CAS with 10 digits;We also allow user to dial the full number t...

Hello, my customer has a shared setup on his 7975 so of course when he receive a call both phone rings. the problem is while he is on a call if a second call comes in, when he answer, the second call doesn't show on the other phone only the first cal...

Hi,We are running CUCM6.1 and have users who are members of multiple hunt groups. They require to log into various different hunt groups at various times of the day.However, the HLog feature logs the device out of all hunt groups it's a member of.In...

I have a new server.DMA from 4.1 to 7.02.Everything was fine. installed new licenses, rebooted the machine.Changed the IP AddressRebootedChanged the hostnameRebooted.Now, I cant get the Cisco DB to start, I can log into the CLI, but that's about it.

hardware setup is as follows:2 x UCME (SystemA and SystemB) with a single PRI connected to SystemA. SystemB will be new to the environmentSystemA and SystemB can exist on the same VLAN's if necessary, or they can be entirely separate VLAN's with rou...

Dear AllI want to know how can I monitor and have report all calls from my callmanagerplease give me your hints

We are running CUCM 6.1.3 connected to Unity 5.0. We have recently installed a SIP Voice contact portal where you ask for the person by name. All works well unless you ask for a persons voicemail. If you as a user have a voicemail box, and dial into ...

Hello guys I have a question.Is there a way to change a unity 5.0 from exchange to Domino without installing again the unity application, or I have to reinstall all using the software for Lotus domino?Thanks for your help.