Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dear Team, Cisco Phones are restarting the exact time interval (every 4 hours) for both SIP and SCCP phones. Attached is the one of the console logs. As per the sys log application logs this is due to TCP timeout but there is nothing found from netwo...
Greetings, For BE7000, what is the difference between R-UCL-UCM-LIC-K9 and CUWL-11X-K9? When is R-UCL-UCM-LIC-K9 preferred as its per user license?
Hello, I have CUCM installed and I have an issues with forwarding calls to a Mobile. When my London user forwards their Cisco handset to a mobile number only London users can call that person. Someone in the Paris office using a Paris Device Pool and...
In Cisco Unity, Auto Attendant does not transfer calls. Call handler goes to voice mail instead of ringing the subscriber's IP phones and results in the error - "Sorry, the subscriber you want to reach is currently unavailable. Please leave a message...
Hello!If possible, I ask you to help in solving the problem:The organization has several branches distributed throughout the country. Each branch has its own connection to the PSTN.It is planned to connect all branches through SME. To reduce the numb...
Hi All, Can somebody elaborate the call flow of outgoing call from Ip phone to PSTN and incoming call from PSTN to ip phone. Please provide me information as step by step. 1] Outgoing: IP phone to PSTN 2] Outgoing: IP phone to IP phone 3] Incoming: ...
I have a Cisco 8845 VoIP phone at a remote site that is configured to ring automatically to a group of 8945 phones at our main campus (for a Help Desk-type scenario) using PLAR. The 8845 uses SIP while the 8945 use SCCP, but it worked as intended wh...
I have a user who would like the questions to play before the answers in the voicemail so they can confirm they match up. Currently all they get in the voicemail is a beep between answers.I also tried sending it to email and this gives you a separ...
CUCM 11.5, 8851 phones. I have the BLF working but when i press it it doesn't dial the phone. "Your call cannot be completed as dialed"Are these literally just BLF?? Or am i missing something?
Hello Everyone, This is my first time posting on here and want to apologize ahead if I posted in the incorrect Community. I did search the forum in hopes to find any answers regarding some licensing questions but didn't quiet find what i was looking...
Hello All, I would like to schedule a monthly export of CDR/CMR reports but am not sure how to schedule these reports. We are currently receiving 1 report every minute. Any help is greatly appreciated. Thank you! Greg
Hi all. I have opened a case on this but wanted to see if anyone might have some experience with this. We have had a lot of users that used CIPC to work from home. With CIPC being end of sale, we have started moving to Jabber as a phone only, no IM...
I just upgraded to CM 10.5.2.12903-1 and I am getting reports (reproducible) that when a user picks up a call on their headset and then ends the call (using the End Call softkey) the headset button is no longer illuminated. This means that the users...
I have upgraded a phone from a 7970 that had a external speaker jack that the phone hooked to that would ring to a outside speaker. I had to replace the phone and saw that the 8861 has a external jack. My issue when then phone ring's its not rining o...
Hello, has anybody enabled EEM in IOS ISR4K that functions as a CUBE? Is the co existence supported? Any documentation available? Regards
