Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Could please let me know how to change Admin password for CCM 5. x in GUI or CLI level
We have clustered CCM 5.1, and sometime some lines become unavailable and give the called fast busy tone. The only bad solution I found is to delete the line from the phone and return it back!!! Is there a good solution for that case???Please advice.
Kindly provide me the steps to process user , Corporate directory bulk upload for CCM 5.1.
how i will know which database,version ,and data type format is used in CUCM 5.1.
I have to configure DIRT on a Unity 4.0(4) server that is already in production. Once I have run through the steps in Unity to configure DIRT, do I need to run the permissions wizard? Please let me know if you do.Thank you!Rgds,Vicky
I have problem connecting to voicemail pilot from pstn, not from internal ip phone. The calls disconnected. the connection is as below :pstn -> vgw -> cucm -> cuc65396789 = voicemail pilot number96409253 = handphone numberNot sure whether is it due t...
Hi,Which are the exact softs names (from the Cisco Download Center) that should be installed on an MCS to have an Operational Meeting Place Platform version 6.0 that can do audio, video and web conferencing ?best regards,
Testing a SIP to SIP IP Trunking implementation with CUBE and came across an interesting problem. When a call is placed on hold and then resumed one side of the audio path breaks. on an inbound call - no audio back to PSTNon an outbound call - no au...
We're preparing to deploy a call recording solution to one of our branches, and I have a couple of questions regarding the overall strategy. This particular branch is on a remote CUCM 5.1 cluster with local CUE.Setting up the spans to send the RTP t...
How do I not have MOH played on a confernece call. I hate putting a confernece on hold and users hearing my music or beep.
Is it possible to have a single DID ring on ten separate phones other than assigning a single extension to every phone? Basically, my client would like the system to behave like a key system where inbound calls ring on all phones. If I use the sing...
I have a background images that works perfectly fine on both 7911 and 7970. However, whatever i tried it doesn't appear on the list on the 7975.Would appreciated if anyone can shed some light on this.Cheers,Hunt
Hey Everyone, I have a PRI that is currently down. Here is what my controller shows0/0/1 is down. Applique type is Channelized T1 Cablelength is long gain36 0db Transmitter is sending remote alarm. Receiver is getting AIS. alarm-trigger is not s...
Hello I need to know how do to desactivated for completely the security in un UCCM 6.X and I need that ip phone never received a new CTL again.I do delete CTL of ip phone but a get a new ctl this I do not need.any can help me?
I am configuring devices for IPT Express (see network diagram atached). Is it better to configure the dhcp pool for the IP Phones on the gateway of the Core switches? And what are the implications. If I have to configure the DHCP on the Core switches...
