Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I had the message related to logging into CUE through the GUI and it asking for me to reconnect to the CME with the lost contact screen. My pkg was out of synch and I found this out because I wanted to reset to factory defaults,it came up with a mes...
I have a Cisco phone 7911 and I would like to assign two different lines to your button? The first number Annex phone number and the second the number of the GDM, General Delivery Mailboxes. I can doing?
Any one who can kindly inform me how to reach this goal,"Ip phones have trivial names such as Phone1 line1, Phone2 line1, but no local directory "Pls give me the configuration command. Thanks
Hi all.I've this strange problem:we have approximately 500 cisco ip phones, registered on our CCM 6.1.2.1000-13all phones using a user locale ITALIAN configuration, and all work wellthis configuration come from old CCM4.1 configuration, imported when...
I`m due to upgrade a CUCM 6.X server to 6.1. and I`m querying a procedureCurrent set up Publisher - Running as Glass House- No CM Services, No TFTP etcSubscriber2x TFTP ServersI know we upgrade to an inactive partition so not to effect production ho...
I have 5 Cisco 7960 Ip Phones connected to a 2811 running CME 4.1 My issue is that 4 out of 5 phones display "File Not Found" after getting the IP Address from DHCP. There is one phone that I have configured identically to the rest that works. The on...
Ring 4001 even in DND mode or call-waiting mode, ?Any one who can inform me whether the following command can meet the requirement??ephone-dn 1 dualnumber 4001call-waiting ringephone 1button 1:1no dnd feature-ring
Any one who can give me the configuration on CME for the belowing requirement. ThanksPhone2 have the third line, number 4003, 4004.While 4003 is answering call, call incoming to 4004 will be shown as thewaiting call, and the caller can hear waiting t...
I have to integrate the call manager 4.2.1 with Cisco Catalyst 6509 switch (the Cisco Catalyst 6000 E1 VoIP Gateway)using MGCPon the catalyst Switch, I have the voice module "WS-X6608-E1" ...I am trying to search some document on how to do it... I ca...
How to make it in Unity according to the belowing ,On hour(9am-5pm)call 2003 noan/busy forward to 4085158801after hour, call 2003 noan/busy can leave msgpls give me some advice or useful URL for reference.Thanks
Installing CUCM v 7.0 and was testing Single Number Reach. Now I have the settings configured but as i was reading the Admin guide I realized that 7940/60 are not supported with SNR. Is this correct?http://www.cisco.com/en/US/docs/voice_ip_comm/cuc...
We have a customer who is running a CME system with a SIP trunk to a certain provider.When The user calls into a conference bridge they connect. The conference bridge requests the to enter their meeting ID\passcode etc. They are having to re-enter se...
I have NM-HDV with PVDM (not PVDM2)on my CME router. I don't know how to setup Xcoding and Conference for CME with PVDM. Only PVDM-2 configuration guide for CME can be found.Pls give me some advice?
I'm trying to create a Public Distribution List on Unity Ent. 4.0.5 and the Members option under the Public Distribution List is actually Grayed out and I cannot add members to it. Unity 4.0.5 is integrated with Lotus Domino????? Help.
We have this occasional problem in one of our remote sites. It seems (based from the "show call active" output below) that when a user hairpinned and call another FXO user on the same router/gateway, the call will stay-up indefinitely. Any ideas? Tel...
