IP Telephony and Phones

Hello,I have a customer with CUCM 4.2 installed and she has a new requirement for a particular hunt pilot. When calls come in, they go to hunt pilot 8500. On No Answer after a certain length of time the call goes to another extension 2757. The custom...

Hi,On our older CallManager 3.3 , whenever we deployed a new Directory Number (DN) it would appear in the Corporate Directory. If we applied the DN to a: Device > PhoneDevice > Device ProfileUserThe DN would then appear as searchable (with the relev...

I can't seem to get the meetme conference to work or the application associate to the dsp profile. I'm posting the config and a few extra commands. Please help.

We have a CUE 3.2.1 with CME 4.2. My users are complaining that they cannot reply to a voicemail from their phone. Step by step what happens.The press their mailbox button, it plays the message, then the cisco default prompter says if you want to r...

Hi all,My set-up is one like this:Ip phones are registered to a cisco callmanager,an H3.23 gateway is also registered to the same callmanager-the gateway is a cisco 2821 cisco router-which has a number of FXO ports where the pstn providers have termi...

Hello Sirs,We have 2 MGCP IOS gateway connected over WAN connection and through PSTN and the Head Quarter is connected with CUCM v6.0I need the full configuration of the MGCP gateways.Thanks a lot.....

Problem: Verizon calls to report we had two long-distance calls on such and such date to Cuba. The number number they were dialed from comes back as our PRI line. We use Cisco Call Manager 4.1. How can I determine the device or DID number that made t...

Hello all,I have 2811 with 2xPVDM2-16. There are two SIP trunks, one should be g729 and the other g711. When I make a call from another side to the other with both trunks having g711 everything is fine, call goes through, you can talk etc. However wh...

Hi,(CCM with unity UM 4.0)An IP phone which continuously rings, call doesn't go to the voicemailbox on unity.>>I don't see any call in call viewer in unity!!!The same phone, when checked forward all, forwards call directly to unity voice mailbox.Any ...

Hi all,We have a CME router with a CUE module on it. We have an IVR on CUE. When they call us from outside they drop to IVR. But when it tells dial your extension, when they dial nothing happens. It didnot recognize the digits they dial. But it was w...

Can any of you chaps point me in the direction of good installation documentation for a UCM v7x fresh install (new installation onto a new HP box)ThanksRod