Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,following situation:I have a 2600XM running CME 3.3 on it, with a VIC-2FXO-EU. I'm able to make outgoing calls to the POTS, but not able to take calls from the POTS. Infrastucture looks like this:POTS <---> PBX <---> 2600XM <---> IP networkAny ...
When i lift the handset off the cradle the speaker light illuminates automatically, when I press the speaker button to disable it terminates the incoming call. Any ideas on how to disable this feature would be greatly appreciated.
Hi,I have run DMA 6.1 on my CCM V4.1(3) Publisher.I have received 6 Warning messages in the warning log file. All warnings are related to the TelecasterServiceParameter.eg Warning message (Business Rule Violation): TelecasterServiceParameter Descrip...
I have outbound caller id blocked for the entire organization and I wondered if it was possible to enable it for one individual user.thanks
Hi, Using the night service function, can I forward a call to a mobile number by turning on the night service bell? I don't want it to call an internal DN because there won't be anyone in the office out of hours, the call will need to go the security...
We are on CallManager 5.1. We are getting harrassing phone calls and I was wondering if there is a way to enable a temporary mask on outbound calls?I can make a blanket phone number mask change in CallManager, but is there a way to punch in a code f...
I have to change the device pool and media resource grp for a group of IP phone users. There are about 31 IP phones to make the change to and I am wondering if there is a way to make these changes to the group all at once the way you can in Unity 4....
When phone with forwarded mobile number goes in SRST mode,will phone call forwarded mobile number in SRST mode? Thanks!
Hi,I currently have a translation pattern 0 which gets sent to a 4digit extensio for the operator. I plan on porting some DID's from an acquired company but thier numbering range is 0700-07xx. How can I set this up so the system does not immediately ...
Anyone experienced issues with dtmf over sip trunks to VOIP Provider, all works good internally but does not work outbound dtmf or inbound on the auto attendant, i have tried all the dtmf relays in the dial-peer ooptions and nothing
We have CCM 6.1.0 I have a user that used to be able to make Long Distance Calls but can not make them now. The Partition and Calling Search Space are ones that allow Long Distance Calls. Is there a way to correct the problem?
Hello,My cluster contains 2 CUCM 6.0 (1 Publisher & 1 Subscriber)In the CallManager Group, when the publisher is "primary", the IP phones can register correctly.When the subscriber is configured as "primary" (or alone in the CallManager Group), the m...
Hi, I would like to know the number of max signaling session that can be handled by the unique time slot configured between the SSP and an ITP-L (2811)in a PGW2200 solution?Regards
Hi there, One of our field offices has a number of analog phones, with older headsets. I haven't seen one in person, but the people there told me it's a "Avaya/Plantronics KS23822-L1". I think it's made by Plantronics, but sold by Avaya. Other we...
Hello,We are using IPMA with several managers. We have added one manager, and the assistant only sees a "?" in the line status in the application.Everytime we do a a change in the IPMA (add/remove users p.e.), we do a reset of the IPMA service.I have...
