Hi , We have 5 phones at the reception configured as a line group. When the receptionists are out of office they need to get the calls to their mobile number. So, I mentioned a mobile number in the "Forward All" field of directory number configurati...
Forum Posts
Hi All, We have two strange issues in our environment. Attendant Console client does not show real-time alerting name from IP phone: Attendant console business edition 9.x is deployed with CUCM 9.1.2. Operators will use attendant console client fo...
When our clients are logged in to Jabber there are 2 pop-ups for certificate warning when he accepts all the certificate pop-ups again error gets pop-up(Repeatedly for every 2 min).How is it possible to disable this warning? Can anyone help me? Is it...
Hello, Firstly...This may sound a bit daft. I have recently purchased a Cisco 7962 IP Phone. It pre populated with the IP addresses v4 & v6 In the phone menu however it is constantly stuck on "Configuring IP" Its Probably worth noting that the phone...
The carrier is delivering an analog port to an IAD. The IAD is supposed to send it to an IPPBX. When I call the number it appears the call is picked up and all I get is dead air. The call never goes to the PBX. I have changed the dial-peers to .T ...
Resolved! Forgot the name of a feature in CUCM
llo Everyone, I am new the cisco forum and I have a really dumb question. I seems to have forgotten the name of a feature in CUCM. I am looking to create a auto directory that ties into an existing name. For instance, when anyone calls our main exten...
Resolved! VG224 - Unable to load boot image
Hello, this is my first post and I'll do my best to provide the information needed. Also, please let me know if I submitted this post on the wrong category --- I'm trying to update the firmware of a VG224 however I have not been successful. I want t...
Hi all, We have Cisco Unity Connection Administration 7.0 and problem is for one userwe reset the voice mail password for the user and it gives us error : user accounthas been locked out please contact system adminstrator.We tried t...
Hi,I have problem for registering IP Communicator 7.0.6.0. Its keep on registering.CME 10.5IP Phones 79xx and 69xx series phones are working fine.
Resolved! One-Way voice in a call over VPN
Hello all:We have a problem with the calls when they come from a user connected through VPN. The topology is the next:VPN User->ASA->ROUTER->User in office.Both users are in inside interface and the command "same-security-traffic permit intra-interfa...
Hi All,Trying to understand why this is happening and where to fix it. Example: An external caller calls my desk, its forwarded to my cell phone and the caller ID shows the callers number with an 8 in front of it. This is the number to make an extern...
I’ve inherited a CUCM with endpoints spread out over approximately 30 locations. Most of our phones are still 7900 series running on SCCP with the vast majority of our phone numbers on 2 SIP trunks. I have an Avaya admin background so I am familiar w...
Hey guys, I have two VM's running CUCM together with a VG202XM. I have a old elevator with a intercom which I need to hook up to my phone system somehow. Is there some device I can use to take a old intercom/doorphone and have it convert to something...
Hello, I read a lot of articels in here, but I did not find the solution for my problem until now. I enabled 802.1x on my Cisco Switch and Windows Clients are working fine. Now I want to enable Cisco IP Phones to authenticate with my NPS 2008R2 Serv...
Hi, I bought a 7975G phone, but unfortunately I can't download the updates, obviously I contacted the assistance who told me that the product expired in 2019 and therefore he couldn't help me, and he told me to open a post in this forum, I hope someo...
