Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Folks, I am interested in downloading and playing with the demo UC Manager for a mid size company (less than 500 employees).I followed the link below and I was able to find a number of UC downloads. However, it says UC Manager Express, but I do not s...
Hi,I just replaced an it staff who was taking care of our ip phones and I'm trying to login to the cisco unity express web page but I don't have the password how can I reset this password. Also one of my ip 7911 phones suddenly keeps dying on me and...
Hi,we have CUCMBE with UnityConnection 2.1.We have a personal greeting on the voicemail, but after the personal greeting every time come a system greeting which says something like "You can record a message or wait for further options". We want to ha...
I'm looking at using an Avaya VPN phone for a remote employee, simply because Cisco doesn't have one. I've figured out what needs to be done in setting up the VPN tunnel between the phone and the ASA. My question is, can the Cisco CallManager control...
Folksdoes QoS works even if you have cisco gear (routers and switches) but the VoIP is from a different vendor?
Guys,We have Cisco 2811 Voice gateway with 2 E1/T1 port. We have 4 E1, 2E1 for DID and 2 E1 for DOD.Currently we have Cisco CallManager 4.2 and we want to use the 4E1 to call and receive from outside.I already configured how to connect from callmanag...
Hi all,I need to Call Forward All from my 7931 at the end of the day.Now i can type in the number manually... but I have a 7931 with an abundance of free buttons up the side of it.. can I somehow link one of those to a mobile number?I know i cam pres...
Does anyone see any issue with this display's percentage of "active disk used" field?
Customer has UCMBE and MGCP PRI. Incoming calls are directed to a CTI Route Point forwarded directly to voicemail for a system handler based Auto Attendant. This issue is that when the number is called the caller never hears a ring at all. What th...
Hi NetPro,Both CME and CUE show the correct time and date in CLI. But when I listen to the recorded messages, the AM time is reported as PM, 12 hours shifted. Also, the business hours and non-business hours are reversed in AA.Thanks in advance.
Hi, I encoutered some trouble when testing User System Transfer in Unity Connection.I have configured a restriction which deny 90 and permit *. And assign this restriction to COS-Deby90, also assign this COS to user-TOM.But it seems it can't match my...
We have users on an Avaya Definity G3si Switch that use our Cisco Unity Connection (v 2.1.1) Voice Mail. With an Digital phone you can create a coverage path for the call to follow until it reaches the voice mail. Since we left the Avaya Intuity Audi...
I have a couple of FAXes connected to FXS ports on a UC520 that send FAXes out over an ISDN/PRI connection. I was getting spotty results with some FAXes going thru and others failing. Troubleshooting the problem I found that the problem seems to be...
We are running call manager version 4.1.3 sr6a. Attendant Console keyboard shortkeys are not working. I've already restarted the telephony call dispatcher service, no change.
Hello,following situation:I have a 2600XM running CME 3.3 on it, with a VIC-2FXO-EU. I'm able to make outgoing calls to the POTS, but not able to take calls from the POTS. Infrastucture looks like this:POTS <---> PBX <---> 2600XM <---> IP networkAny ...
