Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I'm looking at using an Avaya VPN phone for a remote employee, simply because Cisco doesn't have one. I've figured out what needs to be done in setting up the VPN tunnel between the phone and the ASA. My question is, can the Cisco CallManager control...
Folksdoes QoS works even if you have cisco gear (routers and switches) but the VoIP is from a different vendor?
Guys,We have Cisco 2811 Voice gateway with 2 E1/T1 port. We have 4 E1, 2E1 for DID and 2 E1 for DOD.Currently we have Cisco CallManager 4.2 and we want to use the 4E1 to call and receive from outside.I already configured how to connect from callmanag...
Hi all,I need to Call Forward All from my 7931 at the end of the day.Now i can type in the number manually... but I have a 7931 with an abundance of free buttons up the side of it.. can I somehow link one of those to a mobile number?I know i cam pres...
Does anyone see any issue with this display's percentage of "active disk used" field?
Customer has UCMBE and MGCP PRI. Incoming calls are directed to a CTI Route Point forwarded directly to voicemail for a system handler based Auto Attendant. This issue is that when the number is called the caller never hears a ring at all. What th...
Hi NetPro,Both CME and CUE show the correct time and date in CLI. But when I listen to the recorded messages, the AM time is reported as PM, 12 hours shifted. Also, the business hours and non-business hours are reversed in AA.Thanks in advance.
Hi, I encoutered some trouble when testing User System Transfer in Unity Connection.I have configured a restriction which deny 90 and permit *. And assign this restriction to COS-Deby90, also assign this COS to user-TOM.But it seems it can't match my...
We have users on an Avaya Definity G3si Switch that use our Cisco Unity Connection (v 2.1.1) Voice Mail. With an Digital phone you can create a coverage path for the call to follow until it reaches the voice mail. Since we left the Avaya Intuity Audi...
I have a couple of FAXes connected to FXS ports on a UC520 that send FAXes out over an ISDN/PRI connection. I was getting spotty results with some FAXes going thru and others failing. Troubleshooting the problem I found that the problem seems to be...
We are running call manager version 4.1.3 sr6a. Attendant Console keyboard shortkeys are not working. I've already restarted the telephony call dispatcher service, no change.
Hello,following situation:I have a 2600XM running CME 3.3 on it, with a VIC-2FXO-EU. I'm able to make outgoing calls to the POTS, but not able to take calls from the POTS. Infrastucture looks like this:POTS <---> PBX <---> 2600XM <---> IP networkAny ...
When i lift the handset off the cradle the speaker light illuminates automatically, when I press the speaker button to disable it terminates the incoming call. Any ideas on how to disable this feature would be greatly appreciated.
Hi,I have run DMA 6.1 on my CCM V4.1(3) Publisher.I have received 6 Warning messages in the warning log file. All warnings are related to the TelecasterServiceParameter.eg Warning message (Business Rule Violation): TelecasterServiceParameter Descrip...
I have outbound caller id blocked for the entire organization and I wondered if it was possible to enable it for one individual user.thanks
