IP Telephony and Phones

hii got the ipcc 5 seats that came with ccm 6.x, and i want to install this ipcc, my question is that do i need to install this ipcc on an MCS server or any pc will work?another thing, should i get Win2K server from Cisco or if i have my own Win2K i ...

Under the Common Phone Profile configuration, there is something called "Local Phone Unlock Password".What for is this?? can someone through some light on this...I could not understand in which scenario this can be used...

WHERE CAN I READ ABOUT MS SQL DATABASES USED WITH CALLMANAGER?FOREXAMPLE I WANT TO SELECT ALL PHONES FROM ADM.WEB.PAGE "DEVICE->PHONE" BY SQL QUERYHOW CAN I DO THIS?I FOUND ONLY TABLE "NUMPLAN" THAT CONTAINS ALL DIALPLAN, BUT THERE IS ALSO DELETED S...

how to disable newcall button on cisco phone.i blv it cannot be done as it wont allow u to remove it from softkey template, but dont know if some application can do this.

I was able to get an SPA942 to register with my CME on the LAN. However, when I move the SPA942 to a location behind a NAT, it fails to register. I ran "debug ccsip messages" on the CME and found multiple issues with the SPA not registering. Main pro...

Hi,I am using CCM 4.2(3) and mgcp gateway in IPTelephony setup. I enabled CDR and now i can get report for All Calls based on CMC or other criteria. My question, is this possible i just enable CDR for specific calls like for specific Route Pattern. A...

we were looking solution to use for ring every phone same time in group. does callmanager ,unity or ipcc express or else have feature to do this function. or if someone have experience with other 3rd party please recommend. please sugges

Hi, i recently joined a company as IT engineer, unfortunately i dont have that much information about Cisco IP telephoney and call manager... i went through the quick start guide that came with cisco2811 but was not able to log into the router..not t...

HiIs it possible to have incoming/ougoing voice calls on an E1 link and also accept inbound modem calls on a voice gateway.?

I have a route pattern where apparently in the called party transformation I need to send the string digit by digit.Our VG is connected by QSIG to an Alcatel 4400.Is there any way to send digit by digit instead of the whole string as a packet?Thanks

Hi Guys,I have a problem on a new setup with incoming calls not ringing through to the phone.My dial peers are being matched and i`m using translation patterns to convert from 6-5 digits.Gateway is H323.So is there a way of checking where the breakdo...

Hi,I have a UC500. Besides going to the web interface for CCME/CUE and going to Reports - Call History, how can I see what calls are being made on the system? How far back does this data go?Thanks for your help!Scott

I have recently configured a CCME and when the users call outside the number being displayed to the other party is our pilot number instead of the indivudal extension numbers...What I mean is that if a user calls outside from a extension 115 the othe...