IP Telephony and Phones

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Labels

Forum Posts

No Authentication Proxy Rights

I am trying to implement Click2Dial for an Intranet using a proxy user. The intent is that when a user clicks on a phone number link, the call is made automatically using the proxy user's credentials. I am trying the following three different metho...

7941 unable to boot

I am attempting to install new 7941-G-GE phone and all I get is the green speaker light and on a regular basis the handset, lines and mute buttons will blink. At this same time apparently it looses the connection to the switch. The LCD has not disp...

dterada by Beginner
  • 4108 Views
  • 7 replies
  • 0 Helpful votes

SRST Integration With Microsoft UC

Hi everyone!I have a request from a client who wishes to integrate the Microsoft Communications Unified suite using Cisco Vioce Gateways with SRST feature to give survival to Microsoft Office Communications Server 2007 voice feature.Could this be pos...

miguelho by Beginner
  • 177 Views
  • 1 replies
  • 0 Helpful votes

PSTN calls drop

CallManager 4.1(3)Calls to/from PSTN are dropping intermittently. Internal calls for same cluster is fine.No event viewer messages on the subscriber server. Gateways are two Cisco 3745 with 2 PRIs on one and one on the other. Nothing in the GW logs.G...

metuzuner by Beginner
  • 286 Views
  • 4 replies
  • 0 Helpful votes

IPMA

hi all,i'm configured IPMA with proxy line to a manager and his assistant, but the problème is when someone call a manager the call is not routed to assistant automaticaly, the manager phone ring 3 or 4 time and then the call is routed to assistant....

Pots dial-peer

Hii experts,,When I dial throught the analoge line in the VG and the other party hang up the the his phone, if I letft the line up hte call will not end and the analoge line port will still up for along time ..PLZ if ther is any config. in the VG to ...

Modifying softkey layout in CM

Hi there,we're mainly using Cisco 7961 and 7971 devices for which we use a custom softkey layout.Now I'd like to modify this layout in Callmanager 4.3 by adding or removing some softkeys.So our staff likes to have a key to suppress incoming calls or ...

NiclasCpm by Beginner
  • 451 Views
  • 4 replies
  • 0 Helpful votes

VPN and SRST

Hey everyone --I have a customer with 15+ branches running in SRST mode. About half of the branches have a VPN tunnel through the internet, the other half are on directly on the MPLS (via a T1 or DSL/Net-VPN). I have a problem where each of the branc...

ouhakheme by Participant
  • 474 Views
  • 2 replies
  • 0 Helpful votes