Hi, I'm looking around to buy a Cisco layer 3 switch for my CCNP home study lab and it seems like the WS-C3550-48-EMI is a good choice. I also want to learn Cisco VOIP but I don't know anything about equipment requirements for learning VOIP. Can ...
Hi, I'm looking around to buy a Cisco layer 3 switch for my CCNP home study lab and it seems like the WS-C3550-48-EMI is a good choice. I also want to learn Cisco VOIP but I don't know anything about equipment requirements for learning VOIP. Can ...
Hello everyone. I wanted to see if its possible to do PBX voice channels over MPLS? My current situation is that we and a T1 and do data over one channel-group and PBX voice over another. We want to move to an MPLS, but I dont know if we can do th...
Hello,I have 2xVIC2-2BRI-NT/TE connected to a Cisco 2851 ISR. The problem is the four BRI circuits that are connected to this BRI module does not turn up automatically after router reload. Below is the configuration:interface BRI0/0/0 no ip address...
On cisco.com it is mentioned..âEach DSP is individually configurable to support either conferencing or transcoding and standard voice TerminationâOn a single DSP I can support either only transcoder or Conference or MTP ?? Am I right in my unders...
I have one FXO 911 line setup at multiple locations. Basically if someone at a firestation makes a 911 call. I have their calling search space set to a group for that building. That way 911 or 9911 calls are passed out the single FXO line I have for ...
Strange problem only happens with verizon cell phone. CM call forward to cell phone. From IP phone if I call the IP phone with the call forward works fine. If I call from outside to did which would ring IP phone and thus call forward end user cell ph...
Is there any way for an end user to add members to a public dist? either through a web interface or their phone...Thanks.
Dear All.I add one ip phone in Call manager 5.2 with SIP protocol ....... now i have a request to forward all incoming call to specific sip URL link ....and i dnt know how to do it please help me to confiugare this casewaiting for your replies best r...
Hi all,Currently implementing a DISA feature for a Customer. However, I can only do it with a CUE.Come across, using this in-built Script:clid_authen_collectHowever, my customer is using a PRI connection, so not very sure on how to implement this:dia...
Were testing/learing in our lab. We have one router running CME connected to another router over ethernet running as h323 gateway and connected to a call manager. On the near side CME router, in the voip dial-peers that point to the other side, do ...
The phones in question are not registering with CM4.1. I think its because of the lack of backward compatibilty with the CM4.1 firmware for the 7961G and the default firmware for the 7961G but I am not sure. The phones have got the term61.default fir...
I am setting up some IP Phones with the intercom feature now in Callmanager 6.1 which is working great. My only question is can this be used to page multiple phones at a time, perhaps by simply setting up a hunt group for multiple intercom lines? I...
If you order this bundle "3845 Voice Bundle Included: FL-CCME-240 Cisco CallManager Express Feat License Up To 240 Phones" do you order phones with licenses or phone spares. What is the part number? I know the licenses are paper and will not impact...
Unity tools depot -> Cisco Unity Telephony Integration ManagerWhere can I get the Unity Tools Depot for UC 2.0.1I need to get to the Telephony Integration Manager in order to do do some things.
Is it possible to have Unified Messaging with Unity Express that comes with Unified Communication 500 Series.Any documents/white sheets to support or deny it?If not what would the best option to get this feature for a small scale solution - as small ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
02-07-2025 02:45 AM | ||
02-04-2025 01:17 PM | ||
02-04-2025 06:55 AM | ||
02-04-2025 01:31 AM | ||
02-03-2025 03:57 AM |
User | Count |
---|---|
5 | |
4 | |
1 | |
1 | |
1 |