IP Telephony and Phones

The entire message I am getting in my application event logs is "Error:GetNewFileName-fopen in wb mode failed to update existing file. szFileNumberName=E:Traces\DBL\DBL_CTFTP~num.bin." It seems to a permissions issue not allowing access to write to ...

Hi,I'm using CCM 4.2(3) currently the phone system fowards straight to the auto attendant.If the caller from the PSTN dialed an extension that belongs to a remote location the autoattendant will say:"Wait while I transfer your call." Everything works...

Cucm 6.1.1 --> H323 Gateway with Sip Provider terminated on a Sip-ua config.CallIn, CallOut, Transfer .. all works fine; only if I configure a CFA on a Phone there are problem:if I make a call from Pstn to an internal IPPhone with CFA to another IPPh...

I need some options:problem with end user when they try to transfer a call by putting the caller on hold, * the dn then transfer again to go to their voicemail. When 2nd softkey transfer is delayed so therefore the caller hears partial greeting and ...

Hello Guys,I don't know what happend but since this morning we need to dial twice the FAC in order to dial long distance and for some people even if we dial twice is not working. The message says the code is no valide. I verified the codes and they a...

wha are the steps to set up an IP comunicator in a call manager?

I have a CUBE (IPIP Gateway) with Sip from the provider pointing t the our CCM 4.2.3 I have a CMM provisioned for MTP and Transcoding. When i make calls to the PSTN, How can i debug the CMM to see if the MTP is being engaged?Thanks

Hello all,Hope everyone is well !!! I am experiencing video quality issues with teleworkers using IP Communicator and Cisco VTA connecting over VPN. The voice quality is excellent but the video stream is out of sync and the picture is really jerky. I...

Does anyone know if it is possible to have a remote user who has a 7940 phone who is connecting through a software vpn? Does this work? If not what do you need?

We have recently had a case where two SIP trunks we are running with CME has been compromised Simultaneously and we've racked up £££ worth of fraudulent calls.The SIP trunks are provided by Gamma Telecom's IPDC service. Gamma are saying that the C...

Dear all,I try to connect a new application through a SIP trunk. When I try to dial off-net through my H323 gateway, the CUCM send me INVITE after the 200 OK. It seems that is a feature coming from RFC3264. My application supports only RFC3261. How ...

We have a few users who work from home on a software vpn client and utilize IP Communicator v2.0. When they attempt to call someone on our internal network they hear a slight echo, but the person on the Lan hears a considerable amount of echo. This c...

I want to Upgrade my Cisco 2811 IOS from currently 12.3(8) T7 to 12.4.When i used the Cisco Software Advisor all seems to be fine, but i got the following Warning:"This image requires more memory than currently (as per show version) installed on your...

Greetings,I am running CCM 4.2 what is the max number of participants I can add to a meet me conference ?