Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,I would like to know if their's a way to restrict a caller from the outside from calling a directory number in our voice network. We are using CCM 4.2(3) with MGCP gateways.
i use callmanager express ,IOS version 12.4(5.13)T on cisco router 2811 ,problem found on ipphone when press redial softkey, it 'snot redial immediatly but delay for second and then dial the last numberi want to know how to fix this delay
If I have two route patterns like this:[2-9]xx[2-9]xxxxxxx and 82!, and called party is 8204562345. which route pattern will match?
Hi ,I am using CCM version 4.0(2).Is there any way to find the serial number ?the serial number is available physically on Call Manager but that is showing as invalid..regds,aman
The other side says that is sending SUSPEND and NOTIFY - SS7 messages which are converted as remote hold and remote retrieval on PRA.It says those message are coming to my Cisco box (c5350-is-mz.123-18), but the IOS it is not able to interprete them ...
Having CCM 5.1.3 with unity 4.1 When the message is left in the PSTN Partion the ON/OFF works perfectly.When the message left in the CUG partion the it doesnt turns off even if the message is read and deleted,and the OFF no is dialed.Any suggestionsR...
Can I use a phone with a CH1 license from CallManager 4.2 on CallManager Express?
We are experiencing a increasing frequency of crashes on our Publisher Call Manager of the Call Manager Service. This requires a manual restart of the service every time, and is becoming a cause of concern. The system event log message is this: The C...
I have a new CM6 cluster i am installing. Is it possible to change the DNS settings on one of the servers? I installed DNS servers on one of the servers, and i want to disable it since the pub doesn't have dns enabled.
I have an IP Phone currently in one of the remote locations in Sydney, Australia. The Call Manager and Unity are in Data Center located in USA. There is no local subscriber and Unity Voice Mail in Sydney, and the phone will get registered over MPLS...
Hi,I have been working with the migrations for a few weeks and I understand the process of using the Call Manager Upgrade Utility for a health check and the DMA tool to create the tar ball of configuration info for import into the 6.0 install. My que...
Hi experts,I got a point to point ASA 5505 and wanted to configure qos since only the ip phones is using it. Any recommendations? do really qos effective in WAN links?tnx
Hi, I have configured a Cisco CallManager Gw MGCP with Alcatel 4300When i make call, the call is establish, but i have no voice.Thanks for your help.Bye
I need some assistance converting my NM-CE to an NM-CUE. I am wanting to get CUE running in a small lab, and was hoping to be able to do this. Has anyone done this in the past?
I'm working with a customer who swears up and down that they used to be able to answer calls by just touching the portion of the screen that shows the caller-id name/number. I'm not talking about the answer button. They also said that they used to ...
