IP Telephony and Phones

Just a quick question, after just having rolled out our new CCM system, we are having a small call quality issue with the call dropping out then fading back in rather quickly. Just wondering if configuring autoqos on our L2 switches will help with t...

Has anyone been able to configure the C2821 gateway router to allow 911 callback through the PRI line successfully? 911 outbound call through the PRI is fine, but we need to be able to have the 911 operator be able to call us back if needed from the ...

Dear All,I have a problem with my voice port, the green light always on and off, when this problem happened we cannot call through this voice port.Please advice me, if someone have any idea.Best Regards;Boly

Hi all,I'm trying to send a call through a T1 PRI trunk from my 6608 --> CUCM --> router.What I'm trying to do is this for example:dial--> 1234 CUCM send to trunk --> routerusing this command:debug voip dialpeer all Currently I get no log of any mat...

Hello,We have CM 4.2 and an I3 server (SIP) for ACD and are having issues getting DTMF tones out our CMM blades to outside phones. When we dial them and the other end asks for an extension we are unable to enter any numbers from our phones. This only...

Where can I download the Attendant Console for CCM 6.0.1Did not see that it was available at the Cisco Site.

I have a problem when receiving incoming call. The router strips the leftmost digit (0) off and present only the last 10 digits. for example when caller (0123465245) calls, only 123465245 appears on the cisco IP phone. Can somebody advice me on what ...

I am triying to install Ciso Ip Phone 7937 with CMM 4.1 but I onl see Cisco 7936 on the "Add a new Phone" page. Is the 7937 model supprted on CCM 4.1?

Hi,I am not able to do LDAP integration, I am not finding the users in the U.P. from LDAP, how to solve that? Is there a sample configuration guide as the administration guide is not really helping me.Thanks

Unity Version 4.2(1.0)Does anyone know if you have a voice mail account where the password has expired. Will Unity still send out the MWI light notification when users leave voice messages?

Hi, does anyone know if/when cisco will change the Voice LAB from CCM version 4.1 to 5.x/6.x?

We presently have a configuration that allows our receptionist to transfer calls across a tie line to a specific extension ( 8 access code) extension 7059. we would like to transfer/Forward a DID 5546, when called externally or internally across the ...