IP Telephony and Phones

Hello,I am looking for an easy way to allow the end-user to configure a "Call Forward All" when the line concerned is not the 1st one. My client is using a Cisco IP Phone with 2 lines, he can use the "Call Forward All" softkey to configure the 1st li...

In a situation whereby there is one pub and one sub, only the pub's database is writeable. My understanding is that when a query is made for, let's say, a phone on the sub that the information presented on screen is pulled from the pub and is not a ...

Hi,I tried to install a cisco 7921 wireless IP phone on a callmanager 4.1, but the 7921 option does not show on the "Add a new phone page". Does this mean that CCM 4.1 can not support 7921 wireless IP Phone?

I have configured the MGCP gateway and the Call manager to support that gateway.I had debugged the registration output on that gateway, there was a traffic between them..but the status for that gateway and its FXO cards in the call manager is "regist...

Hi Is there a way to stop the personal directory from timing out, forcing user to have to logout and login again? This is CCM 5.1.2.Thanks

CCM 5.1.2 with ESProblem - Unable to log into adminstration web page as another user. Have assigned different roles to the user but the error I get is "Access to the requested resource has been denied""You must restart your web browser in order to l...

Hello, Apparantly, we cannot change the softkey template of a 7911G and CallManager 4.2.We would like to remove the “messages” button, as we do not have a voice-mail system.Any ideas why this does not work ? Did anyone tried this in the past ? (W...

Instantly receive "Record does not match the file format selected" error.Insert RDPs in /common/bps/csvfiles/remotedestinationprofiles/insert/insert.txtFailure Details : Remote Destination Profile Name Error Code Error Description--------------------...

I have a request that need to give warning message, then transfer to IP phone. Can CUE do that?

What would be the correct Hardware to connect:AN E1 ISDN Connection to be terminated on a HDSL modem and then to a CIsco Router - WIC-2MFT-G703/WIC-2MFT-E1 OR Cisco E1/T1 ISDN PRI Network Module or something else???

I plan to get the followingc3725-adventerprisek9-mz.124-16.bin with 64F/256MVWIC-2MFT-T12 Qty of NM-16ESW each with internal PPWR-DCARD-16ESW The 3725 has an "integrated WAN Slot" so does that mean that I do not need to get a dsp for the VWIC as I pl...

I would like to test CUPS 6X in my lab. Is it possible to get a trial copy of the software anywhere. ThanksJason

Dear sirs!We have UCM6.0 and it seems to work only in G711u-law codec. In our region, G711a is preferable, and our ISP has their setup tested in G711a. However, UCM does not handle correctly calls in G711a. As soon we configure IPtoIP gateway Cisco 3...