IP Telephony and Phones

Hi,I am having NM-CUE 2.3 with Call Manager 4.2(3).How to I enable MWI for voice mail users ?What all configuration steps do I need to do in Call Manager as well as in CUE ?Thanks,Manu

Hi All, I have CME with 500 express switch. I setup two vlan one for voice and the other for data. I need to add second data vlan to the CME which has couple of server and PCs in that vlan. sub-interface for the second data vlan can't accept "native"...

Hi Unity gurus,What steps do I need to do on my Unity Connection 1.2 server to setup IMAP access? I have seen lots of documentations & posts abt how to do it on Unity 4.x, but what stuff do i need to do to enable it on Unity Connection 1.2 since Exc...

Does anyone have a link for installing CM 5.x and above with AD.Is it still the same procedure as using the AD Plugin?Customer has new cluster site that will install 5.x then upgrade to 6.0. New this to be an AD database instead of LDAP.Then another...

I want to configure a call which will ring on a phone through a PSTN line situated on the router of the branch office. The call is initiated from the head quarter.But it does not work. When the call is initiated, when I look the voice call status I s...

Hi, I am configuring a hunting option such that when calling the Hunting number say 1000, the call routing will be like Phone A > Phone B > Phone A > Phone A's mailbox.By default it will go to Phone A, then to Phone B, then to Phone A again, then it...

users cant access voice mail when the message button on their phones are pressed. what should I do?

I am having a lot of problems with my Call Manager. I have one Publisher and two Subscribers and for some reason they seem to not replicate anymore. We have tried to use the DBLHelper.exe to fix the problem, but it still unable to replicate. We are ...

Hello. I am not an IP telephony expert, so maybe it's baloney, but what I have found is that normally, by dialing # or *# there is an error message.By random dialing, i discovered a sequence that can be dialed, and DTMF tones resemble a tune when dia...

We are on CCM 4.1.3 and I have a lab of the same version level for pilot and testing purposes. I am now getting ready to go to Cisco UCM 5.1 or 6.0. What would be my option(s) to bring up a 5.1/6.0 lab on new hardware while keeping the current 4.1.3 ...

Hi Everyone,I have a 3825 Router with CallManager 4.13 with MGCP.I'm having an issue with my 1 fax machine. I can receive fax, but cannot sent out fax. Getting fast busy. It feels like it is a route pattern issue, but I cannot figure it out. I have a...

Hi,I am using FXO ports. My confugration is like:voice-port 0/0connection plar 1100This 1100 is a AutoAttendant which will be routed to variuos users depending on the DTMF inputs. Say "pressing 1" will enable to dial by extension. If the call is rout...

I have an MGCP implementation and an E1 implementation and all 8 digits are passed to us. We need to translate this to 5 digits to pass to the phone. We created a translation pattern from all 8 digits to 5 digits, and the call cannot be completed. ...

We have a catalyst 3750 switch and cisco ip phones on certain ports...we would like to understand the advantage disadvantages of configuring Explicit Voice vlan on these ports VSwhere yyy is the voice vlanswitchport access vlan xxx switchport trunk e...