Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have just deployed a setup using H323 and CCM 4.1. When making a call, sometimes the called party is unable to hear the caller. They are however able to hear the music on hold. Any Ideas?
Hello,callmanager 5.X : does anyone know the difference between an application user and an end user ?Many ThanksDirk
I can use MCS7816I3-K9-CMA2 for support 300 users on CCM5.1
Hi All,We are using IP phones and Digital Avaya phone to communicate with our remote users. We are facing humming and buzzing sound from past two days but problem doesn't persist in Digital Avaya phones.Pls suggest.
I modified a device pool to point to a new callmanager group for some reasonthe phone stays with the previous callamanager group settings. eventhough, i manually reset the phone multiple times. i know that the new callmanager group callmanager prefe...
Does anyone have any ideas about what should be done during an IP Telephony discovery? What I mean by IP Telephony discovery is, after a customer has decided to implement IPT, an engineer goes onsite and tries to see what their current environment lo...
Actually i have configured 20 trunk lines on my Call manager, but now i need to add 10 new trunk lines to have 30 trunk lines, my carrier was confirmed that the new 10 lines is ready for use, but i need to configure the call manager to use these new ...
I got a Cisco CallManager Express (CCME) installed. I got an issue with dialing a phone number. When I try to dial a 10-digit number and pause for about 3 seconds after entering the first 5 digits, it disappears. I've to re-enter the number once agai...
Hello,I have (another) weird one. I have 4 VG248s in use but the 4th one (installed post cutover by vendor)is not working properly. Only 3 lines will register and with Publisher not Subscriber. All other ports "register: unknown". They are all se...
CCM 4.1(3)sr3a with BAT 5.1(4a). Is this system support BAT for VG224?
Is there a way I can generate a report from CAR showing all AAR calls?
Hi,I can't seem to get the caller-id when i make a call from the E1 (PBX) to the voip sip network. With this IOS version "c2430-is-mz.124-13.bin", I can't find the commands " caller-id enable" and "station-id number".Here is the config attached.On th...
Cisco IP Communicator (CIPC), Cisco Unified Personal Communicator (CUPC)What's the difference between them? Just different name? Thanks
I read on this forum that a E&M interface can handle only one call at a time. So why do we call it a Trunk, and so what's the point of using E&M instead of FXS if both can handle only one call.cheers
I've been trying to research the "mgcp rtp unreachable timeout command". Although there is plenty of information about this command I have been unable to find out what an "action notify" suffix means. Does anyone know?ThanksJustin
| User | Count |
|---|---|
| 6 | |
| 3 | |
| 2 | |
| 2 | |
| 1 |
