Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Can anyone provide any guidance as to what Cisco's recommended procedure is for defragging a CCM's drive. I have a customer's publisher running 4.1(3) whose drive is 73% fragmented. It took 5 hours to apply some patches over the weekend. Way longer t...
Hi,MeetingPlace Express 1.2.The customer wants to setup a continuous meeting with no-reserved port but no limit of users joining it. We create a group and change the parameter for this group as per the documentation, and created a zero-port meeting f...
We'd like to start exploring toll-bypass, but we need to add a 1 to the CDR if the gateways local to the call are busy and we need to send it out a long distance trunk.As far as I can tell, the route pattern affects the CDR, but the route list does n...
Hello, I've not been able to find an online explanation for an option in the HL configuration for a Unity LG. There is a check box that says, "For Voice Mail Usage". I've tried accessing the VM pilot with and without it, but do not notice any d...
Is there any way for me to link the Corporate Directory on CCM 4.1 to a Access Database?
Hi guys,we are running our call manager with a dedicated E1 and another 37xx Link to our other site in Germany. Most features work fine now after we set the Hicom to EcmaV2 QSig and changed the routers to ISDN contiguous-bchan.The final hurdle now is...
I want to enable couple of Softkey buttons like DND, intrcpt,abbrdial.. can any one please giude me about this how to do that any link any documents stating steps. i have trying searching cisco.com .. cud not find proper doc. i have CCM 5.0. Like wha...
I have configured IP phone encryption phone-to-phone. Now I would like to configure encryption phone to h323 gateways so incoming and outgoing calls are encrypted to/from the gateways. Does anyone have a link or any information about this?Thanks,Chri...
HiI have many Gateway 1760 with voice ports FXS working with Callmanager v4.2, the protocol used is MGCP. The problem is the following:The FXS don not work because it is in shutdown. Why the interface is in shutdow? It is caused by a bug? It is caus...
I am having problems sending a fax over a satellite link. I can receive faxes over the satellite but I can?t send a fax over the satellite. Below are my configs:Remote locationvoice-port 0/1/3 input gain 10 output attenuation -6 echo-cancel coverag...
Hi experts,is there any way to implement fire alrm system system using ccm and ip phones.That means, if any emergency situation ,anyperson in organisation can call one specific number and he should connected with all other ip phones in the organisat...
Has anyone ever had a customer ask for some sort of notification when transfer occurs? Situation is this: On a warm transfer, the customer would like a beep announcing that the call has been transferred. It makes sense, but I have never had anyone ...
Hello,I'm looking for the solution how to make some unusual task with CCM 4.2 and Unity 4.1.1.Company needs to implement a dial jump point for international calls. External user should dial company's main number, after that dial something like a comb...
I need to estimate the coverage of a system using the AP1231G and some cisco ip 7920 phones, but i just can't find the receiver sensitivities for the 7920 phone for each of the available data rates: could anyone help me?Thank you very much
Hi, The soft key call conf feature works OK on internal IPT ext and works OK when we conference with PTT external party. However, the conf feature does not work when we want to conference with an extention in another country i.e. Hong Kong via VOIP....
| User | Count |
|---|---|
| 6 | |
| 3 | |
| 3 | |
| 3 | |
| 1 |
