Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi to all!HW:2811 & fxo portSW:c2800nm-spservicesk9-mz.123-14.T6.binIssue description:pstn(analogic line)------->connection plar with IP phonewhen a caller from PSTN call mi ip phone ring but if caller hungs up before called picks up the ip phone goe...
Dear all,I have 2 dial-peerdial-peer voice 1 pots destination pattern 9........ port 1/0/0dial-peer voice 2 pots destination pattern 9001T port 1/0/0When I dial 9xxxxxxxx, it work. But when i dial 9001xxxxxxxx. The call become 9001.....; it go to dia...
Explain how to get voip connections for a large enterprise,what equipments needed in customer side,how about the physical connection.intial setup,installaton of VOIP equipments.....like EPBX,IPBX,Router,IP phone....etc
I need to change the name of a server with Callmanager installed on it, what is the impact of doing that change on everything, Windows, Calmanager aplication, SQL, etc?
I inserted the phones with just "Display" only in the BAT without the "Alerting Name". Any way bulk update the "Alerting Name"? Advise please,
Does anybody know what version the written test is? They had Version 1 out and supposed to go to version 2 which is/was in beta. Any ideas?
Anything to watch out for that is different from a normal, non-ICS upgrade? Please don't post links to standard upgrade documentation. :)
I have (3) C2610 running XM image, version 12.3, (1) Cat 3550.I understand I would need (3) FXS voice cards and (2) IP Phones to setup a basic VoIP lab. Is that correct or am I missing something ?
I am reall comfortable recommending Cisco 3800 ISR routers for my client, but would 3845 be ideal choice when it comes to deploy 24 to 30 FXO lines. Having only 4 HWVIC slots, I can fit (4)VIC2 (4)FXO cards that gives me maximum of 16 FXO ports. Th...
Hi All; My NM-CUE has been crash last night. it keeps rebooting itself because the number of mailboxes in the system is more that the license.(after I changed the license version from 2.1 to 2.3) I need to reset the NM to factory default but I can't...
I use CME with IP phone, FXO card is use for PSTN connection with config listed below. When I dial in, the IP Phone display the caller-id as 9999.How can I fix it?voice-port 1/0/0 plar connection 7001 caller-id enabledial-peer voice 1 pots destinatio...
We have a single callmanager in the UK with users in Uk and Australia. We now need to setup local breakout for Australia on the Uk callmanager. Is there an easy way to do this? I have setup regions time zones, device pools and Another gateway for Aus...
Hi, I am planning to use ATA 186 replacement to ATA 188 with CallManager 4.1.3. But I saw that ATA 186 only support SIP. My question is how we are going register ATA 186 (Latest one)with CCM 4.1.3
Dear all,I have a 2811 router with Callmanager Express. I am using a VIC-4FXS/DID card for Direct Inward Dial Call.What is the procedure for setup DID?Thanks.
Hi, i'd like to know if there's anyone out there that can be of help. We can't seem to access our voicemails at the office, as we keep getting the response "message server offline" or something. I only know about the CallManager express, but i have v...
