IP Telephony and Phones

I just upgraded CallManager 4.1 to 5.0. I need to add new IP phone device licenses. Cisco document says "Register the PAK with Cisco Unified CallManager using the License Registration web tool that is provided on CCO."But I cannot find the License Re...

I need to migrate of unity express to unity based on server. I would like to validate if unity based on server supports the dial by name and if he supports it I would like that they indicate me like to form it

Hi,Suddenly all the phones were rebooted.I received below errors on CCM publisher and Subscriber.Event Type: ErrorEvent Source: Cisco IP Voice Media Streaming AppEvent Category: NoneEvent ID: 3Date: 11/27/2006Time: 4:22:39 PMUser: N/AComputer: KCM...

HelloWe have a trunk SIP between CCM 4.1(3) and Asterisk 1.2 working fine with codecs g711u/g711a.We want to change the trunk's codec to g729 for WAN link.Incoming calls (from asterisk to ccm) work fine (profile mtp (cisco 2801) or profile xcode) wit...

Hi, I have a 2851 MGCP Gateway with PRI QSIG connection to a PBX.On the VG I see : sh ccmMGCP Domain Name: VG-Office.Pippo.itPriority Status Host============================================================Primary Regi...

I understand that CME only supports 3-way conferencing. Where is the conferencing actually performed? I have a 2801 with a PVDM2-8 and have configured 8 channels on a fractional PRI. I do not have any spare DSP resources available on the router an...

IS there any Voice over IP or Video over IP software network qualification/readiness assesment tools available for testing Jitter, RTD, VQI etc?

Dear all,I have a problem about Music on Hold. I succeed to translate an .wav audio source and make it into use. I put them into Network Hold and User Hold audio source of every user. It seems to work at the beginning, but in a month after I deploy i...

Hi!I am getting a pop-up window with the error message "Configuration Change Failed. Please report the following error: Not Matched Command.." whenever I select "Apply" when I try to associate a Phone with a user via GUI. The ephone and ephone-dn pai...

Cisco 3845, OpenSpeech Recognizer 3.0.3, SpeechWorks MediaServer 4.0.0. When i try to recognize, error://13/00DC56A77900/VXML:/vxml_asr_done: CALL_ERROR; tftp://tftpserver/test.vxml nls interpreter initialization failedWhich IOS for 3845 are 100% wor...

Hi,I'm investigating if it is possible to automaticcaly retransfer an incoming call from the PSTN on a H323 gateway to an external number to the PSTN?regards, Marty

Hi!I've find this problem - russain user locale cannot startred on the 7940/60 phones with "error loading locale" status messages. Another phones are OK. Other locale (spanish in the case) is ok. CCM have latest Device pack (Oct 30) and SR1b. Any id...

Hi i have just installed ccm 4.1.2. I successfully registered 3 ip phones ======================================= Tftp sever is pulling all three files from ip phones and getting registered in ccm. All the phones in ccm is registered and showing ip a...