IP Telephony and Phones

Can someone help me with building the configs necessary on a 501 PIX and a 2621XM router to do VOIP over a VPN connection? Both devices are connected to cable internet connections. I'm guessing I just need to setup a VPN tunnel between the two. I hav...

I use TCL scripts for VoIP and I have memory leaks, so I have to reboot the router every week. In "Sh mem dead" I see many "AFW_application_process" processes. How can I localize this problem ? AFAIK IOS kill all the processes related to the call leg...

Hi,my pri number is: 3199000and i use 1xxx Directory numbers as internal.(i made this by setting significant digits=3 and prefix=1)DID is working. But my problem is when i call from ip phone for example 1064 to pstn , on the called phone my number i...

Hi, Trying to install CCM 5.1 on a brand new HP DL380 G4 Server. Can't get the CCM 5.1 CD to boot on this HP DL380 G4 Server. Have tried using the SmartStart 7.6 CD to assist on OS install - but the only operating systems listed are Windows 2000, 200...

I have seen most of the times engineers would prefer to go with HP series instead of IBM. I have read docs, but don't see much differences between them. Is there any good reason to choose HP over IBM. Just curious

Some user have said that when they try and call unity they get a busy tone. Which report can I run to show how often all the ports are being used?also which report will show me how many messages a subscriber has been left and from which DNs the messa...

Folks, How can I program the callmanager so that it automatically adds a 9 or a 91 to incoming calls so that users can go to diretories option and hit dial without using the edit button?Thanks

Will CallManager 4.1x run on a Microsoft Windows 2003 Server platform? Or is it confined to Windows 2000 Server?

I have a production 2851 gateway with call manager 4.2.3. I have added a vic2-2fxs card to one of the slots, 0/2/0, and have done the "update / reset gateway" through ccm, and the "no mgcp / mgcp" commands on the router. However, the card does not ...

Hello all,This is driving me nuts! System is a 3825, 12.4(9)T1, CME 4.0. My innternational dial-peer is as follows:dial-peer voice 9011 pots description International dialing destination-pattern 9011T port 0/0/0:1 prefix 011As soon as I hit the "0"...

I have Unity 4.1 Exchange 2003. The problem that I'm having is that MWI lights are not coming on. I receive a voice mail in my email but the phones do not light. If I do a refresh status the phone will then receive the proper MWI action. The way ...

Hi,I am running CCM 4.1.3 SR2. 7941G phones which are registered are continuously rebooting and going on re-registering. Any workouts for this issue.Thanks in advance.

In a call manager system that does not use moh when you put a caller on hold you get a tone. We had a complaint that the tone is too loud. We would like to know which wave file is the "on hold tone".