Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I am not certain if this is in the correct forum, please forgive me if it is. Our company recently upgraded to Jabber 12.0.1 and a number of our teams have noticed that If we are actively interacting within the Chat client and a call comes in, the...
Hi, We have a customer who is looking for Cisco Standard IP Phone 8845 and is requesting for CUWL Standard Licensing 10.x Could someone help us in providing the part number for CUWL Standard Licensing 10.x ? Thank you
expert, which one for "Phone only mode" : msiexec.exe /i CiscoJabberSetup.msi /quiet CLEAR=1 CLICK2X=DISABLE or msiexec.exe /i CiscoJabberSetup.msi CLEAR=1 PRODUCT_MODE=Phone_Mode tks, K
I have CME 8.6 running on a 2801 router. There are two 9971 phones (SIP only) registered as well as two analog phones connected via a dual-port FXS card. I have a SIP trunk between the CME and CUCM at the main office. I can 4-digit dial between these...
Hi Everybody! Some of our users would like to hear an audible sound after remote end disconnects the call. Is there any way achieving it without any third party applications (just CUCM)? Thanks!
Hello Dear Experts, Can you please Help me solve the issue I am facing ? I'm Deploying a multisite telephony system. I can't place PSTN calls using local gateway of the branch site. On the CUCM we have configured a route list containing the Standar...
We are running CUCM version 11.5.1.12900-21 Is it possible to forward a specific phone number to a specified extension? In this case the phone number would be an inbound call from an external number, and the user wants the system to see that inboun...
Hi, i have problem with call incoming and outgoing to CUCM. when i'm trying to call 3rd party call manager with extension 200 and my extension is 1201, then fast busy appeared. here is the dial-peer config:dial-peer voice 200 voip description *...
Hi All, I’m doing a test on the auto attendant with hunt pilot routing. Below is the call flow I have now and it is working. User calling mainline (3000) -> there is a system call handler pickup and play announcement -> transfer to hunt pilot number(...
Hi,When using the 7940 phone on speaker, everything works fine. Then, without warning, the incoming audio cuts out. We then have to pick up the handset, and place the person back on speaker phone. I'm not really sure how to troubleshoot. I'm using p...
Unity connection 11.5 and Call Manager 11.5 My scenario is when a new message is left it will not turn the light on. If I trigger the sync from the phone system in unity the light will turn on. If I listen to the message the light will remain on. ...
Hello Everyone. I would like to announce a same contents with many speakers. I tried giving a same dial number to two speakers but, only one speaker(A) could get a call. The other speaker(B) could not join the call, because the speaker(A) is alread...
Hi, I have a problem when configuring recording with Nexlog Recorder. I use BIB as Call Recording features on CUCM 11.5 instead of SPAN.I have prepared everything for this method and tried the below scenarios:Phone A (8861): Built in bridge enable,...
Hi First of all, sorry for my English. We have the following situation. Our customer had a site with a predefined network for IP phones and a survival setting (SRST). We had ve a cluster of CUCM version 11.5 in datacenter (hostlocation company) a...
Hello, CUCM version 11.5 with LDAP integration on port 389. AD team has noticed that CUCM is sending end user credentials in clear text towards AD servers. Is it because LDAPS(secured) is not enabled or there could be any other reasons for this. Pl...
