Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
HI everyone, I'm facing a real problem these days trying to make a SIP trunk work between CUCM 11.5 ( which I control) and Avaya Call manager ( Nortel CS1000 SIP GW release_7.0 version ) first, I can make calls from CUCM towards Avaya ,no issues....
Hi All One of my customer is having Attendant console server with resilient setup and the version is 11.0. Need clarification on below points. Condition - 1: Pub Server is down. > All Attendant console clients will move to Sub server automa...
I have the TFTP server working with the Cisco 8861. I looked in the log of solarwinds TFTP Server and notice the phone is trying to pull the following two files. 1. 8861-3pcc.xml 2. (MACADDRESS).cfg I was under the impression the phone should...
We have a cluster of servers that are over 10 years old. We are in the process of changing over the management of them, and that means updating passwords. That is no problem, except for one server. It is a subscriber in the cluster, and when logging ...
I can send file and screenshot to my colleagues' account.But create a chat room, there aren't 'send file' and 'screenshot' options. Before yesterday, there were the two options in chat room.
Hi Team, We have mixed users in CUCM "LDAP sync" and "Local users". Can you please let me know how to list just the Local Users. we are using CUCM 10.5 I already went to Bulk Admin \ Export. but when I export the "End Users" does not bring the "Lo...
config advice for home modem with gatekeeper and border controller and collab endpoints. (c60 -mxp150 -mxp 1000- mxp 1700)So I bought a used gatekeeper and border controller,want to have all endpoints the possibility for all to call inside or out via...
We are using a new Cisco 8861 phone designed for third party call control. The phone registers with Asterisk fine. Calls back and forth are no problem. I cannot get the phone to pull a config file or new update from TFTP server. My DHCP server ha...
hi we have a ANN that plays "Your call is being recorded" using ECC/CURRI If called internally we hear the full message If called externally we hear "is being recorded" Any idea? thanks
Hi, in RTMT-->Voice/video-->Device Search, When I search for Phones Unregistered it only shows the first 200 devices, I have about 2,000 devices. I realize that the RTMT cannot pull more than 200 in this search, someone can explain to me why? Tha...
Hi all , I`m trying to configuring dial peer voip on 4431 router but it give me this error " Incorrect format for Session Target must be of the form ^loopback:(compressed|uncompressed)$ "
Question.. we are running... CME Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.4(3)M5, REEASE SOFTWARE (fc1) We have hunt group that we want to forward to an OUTSIDE Toll free number after 20 seconds of ringing the hunt gr...
Hi,Is it possible to configure (add/delete/modify) speed dial numbers on expansion module 7914 attached to a 7962 model phone through CUCM self care portal. I have tried adding on the phone and it works but when I try it on expansion module it doesn'...
Hello All I am planning to upgrade a customers CME/CUE from 8.6.6 to 8.6.12 so that they can support the new phone model 7841 and 8821. I have downloaded the cue-vm-k9.SPA.sme.8.6.12.zip and cue-vm-en_GB-langpack.sme.8.6.12.prt1. The zip file consis...
How to read and understand this output ? IP SLA UDP-jitter #show ip sla statistics Load for five secs: 5%/0%; one minute: 4%; five minutes: 4%Time source is NTP, 16:13:00.323 AEST Wed Apr 19 2017 IPSLAs Latest Operation Statistics IPSLA operation id...
| User | Count |
|---|---|
| 15 | |
| 12 | |
| 6 | |
| 4 | |
| 1 |
.jpg "VIP Expert"){kind=icon}
