Hi everyone, When updating the CTL via CTL Client and then entering one of the two SASTs, you are told the validity dates for the SAST including expiration date. Does anyone know conclusively what happens when the SAST expiration date is reached?...
Forum Posts
Resolved! 8845 Wallpaper
Hey, Guys do you know much about the wall paper for 8845. Will it support gif images? What size will it be as 8845 doesnt have a documentation yet that i can see. Any help will be appreciated Thanks in advance
I have a CME 10.5 environment with 7945/65/45 and 6945 phones. I am having a certificate issue with one of the 7965 phones. This phone worked fine up until a little over a week ago. It now fails to register with the following certificate error: 006...
Hello all, We are considering deploying DECT Spectralink for our customers with CUCM. My question is .. Spectralink able to read contacts from CUCM? Thank you for your answer Vojta
Resolved! FXO ringing problem
Dear all,I dial by mobile phone from PSTN to my company number and press the extension number for local phone. The IP Phone rings. Now I hang off the mobile phone but the IP Phone still ringing. So what is the problem? Is it caused by FXO setting? Th...
Im trying to license additional users on the CUCM but the PAK gives me this error.. Kindly assist on how to rectify this.
All, Have just upgraded a CUCM cluster to 11.5.1 SU3b and since then I am unable to register any phones to the previously used TFTP server. However if I use the secondary TFTP the phone registers fine. (Phone downloads CTL all OK - Mixed mode cluster...
Hi Team, I need the solution to enable SRTP in a cluster only between two 3rd party SIP phones which registered in a same call manager (CUCM ver:11.0). If suggest how to enable and if any document please provide me the same.
Hello. I try to register CP7942 (SIP42.9-1-1SR1S) to CME but no result. Say me how correct do it. Follow some information about soft & hard. IOS: Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 15.1(4)M12a, RELEASE SOFTWARE (...
I have a CUBE and third party SIP/IVR system. For incoming calls as soon IVR system answers the call, the call will be dropped with 503 Service Unavailable/cause=47. I could assume and prove that this should be related to codec selection between endp...
experts, - What do we need to aware when using PCD 11.5 to upgrade cluster of 1 Pub & 4 subs of UCM 10.5 to 11.5 ? Caveat, issue, bug ? - If we using simple migration with PCD 11.5 ( to upgrade UCM 10.5 to 11.5) and for some reason we need to...
Resolved! conditional dial-peer for SRST
Hi everyone, Is it possible to use conditional dial-peer for SRST? For example , I've a router via MGCP registered to CUCM. The router have 3 E1 cards and in normal circumstances they are used by 3 different device pools in CUCM. But what if all ...
Hello We have issue with certificates in CUCM, IMP & CUC. We have 3 CUCM Servers: 1 Pub, 2 SUB and 2 IMP, version 11 Also, we have 2 CUC Servers, version 11 We are using CA (internal windows server) Question 1: what is the impact if the ...
Hi everyone, I would like to request some input/advice on CUCM configuration. The customer is using CUCM and CUC at their office. They implemented a call flow where the Line Group consist of at least 2 DN number where the DN is twin to their mobil...
Hello all, I am having issue trying to locate a possible bad config of a phone or maybe pots dial peer. The issue is we have 1 ext that cant recieve incoming calls from the pstn, Outgoing calls to the pstn work fine. This issue only appears to be a...
