Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi, When UCCX redirects a call to an external number the calling party transformations are not applying, and keeps display the CTI port caller ID. I have attempted to use a translation pattern which I have used in the past, and also works on the cur...
Any extension registered to CUCM dials any PSTN number. Now call has been conntected. Now that extension user wants to tranfer that call then tranfer softkey remains unpressed. (nothing happens if we keep pressing tansfer button)
Hello, I want to translate the DID number 35369750 to inbound extension 850 I applied this rule and voice translate profile under the port and tried voice translation rule test and it translated ok but when I tried a call it failed and get success...
Hi!I have CUCM 9.1 and I need import some users and phone from bat.xlsm but have problem.Then I tried on update users tab select and change value "Number of Access Control Group", " Number of Controlled Devices" and other I see message from Excel "Ty...
hello guys, Here is my topology: Crestron Mercury--SIP--CUCM 11.5.1SU2--MGCP--VGW--PRI (PSTN) Everything is working as expected. DTMF works and all. I changed the Gateway protocol to SIP instead of MGCP. DTMF stopped working. DMTF on Cisco End Points...
Hi All, I have some confusion about the renewal of Smartnet Contract for IP Telephony. What I understand is: 1. If I take support for UCS servers by providing Chassis number, I will get support for Hardware 2. If I take ISV1 support, I will get sup...
I am configuring Expressways for B2B calling. outgoing calls work fine. Incoming calls however are failing. I see from expressway core call logs that the call in URi format is being transformed okay and is passed to CUCM. but in the logs i get 408 t...
Hi everyone, I am trying to install a new VG310 gateway but it gives error on boot time & doesn't come on enabe mode. Please check log file & suggest. Thanks
Hi all, if i make a SIP URI call to a CMS space (xxxx.space@domain.de) from Jabber or IP Phone, the connected URI in display is "xxxx.space@192.168.XXX.XXX" . The displayed IP after "@" is the CUCM IP. But I want, that the domain is displayed ins...
I'm having an issue with our phone's that we are only getting one-way audio. and if I get a call on the sip trunk number and i try to answer the call it will drop the call on my end and keep the call going on the other end. This only happens on our S...
Hello all,I am setting up a CME using dual registrations. With the generous help of people on this forum I have gotten the dual registrations to work. But now I need to know how to set up the dial-peer to use the registration information. For exam...
Good morning,We'are deploying CUCM8.6.2 with +E164 dialplan and several SRST gateways. We are running IOS version 15.2(3)T.The phones get correctly registred with their full +E164 extension when going to SRST mode but we would like to implement 4 dig...
Hi, I've been trying to resolve this problem for a few days now (I'm starting in the cisco voip). I set up a Twilio elastic SIP trunk, I'm able to make outside call, but the incoming calls are drop, when I call the number, it simply said that the num...
Hello everyone; So after many years of want to learn, I picked up an 1861-UC and well all I can say is WOW. Had now ideas how different this could be from my ASA. And I will admit I have gotten pretty good with the ASA over the last few years. I wi...
Hi All, I'm fairly new to the Cisco IP telephony world and am hitting a few roadblocks getting a basic working system setup. One main wall I'm running into is getting my SIP trunk registering and working and I'm starting to pull my hair out a bit...
| User | Count |
|---|---|
| 8 | |
| 4 | |
| 3 | |
| 1 | |
| 1 |
