Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi, We configured a Cisco ISR 4321 as MGCP to the CUCM 10.5. Upon checking the output of show ccm-manager the status is registered while on the CUCM side, the E1 port is on unregistered status. Please see the information below for the ISR 4321: SPMY...
Hello, I am trying to register an SPA 112 with CME 8.5 on Cisco 2811. I have configured the SPA mac address as a third party sip phone. However, I dont see the SPA registering. SPA line status says "registration failed" and I dont see any active re...
Hello all We have a remote site where there are 4 8831 conf phones and several 8841 desk phones. When dialling International code in Mexico we use 0 for line then 00 for international. However, when trying this the conf cuts out after the third 0. Th...
Hi all. We have a CME running on a 2951 with Version 15.3(3)M4. We have a few 8831 phones registered using SIP that are unable to make calls. Here's what we have for the phone config:voice register pool-type 8831 description Cisco SIP Phone 8831. re...
Hi folks, I have CUCM 11.5 on Cluster A and CUC 8.0.3 on Cluster B. Cluster-A: CUCM & UCCX 11.x. Cluster-B: CUCM and CUC 8.x. I'm having UCCX 11.6 contact center environment. I've inter-cluster trunk UP and running between CUCM cluster-A and CUCM...
Hi Team, I have a customer that has reported us problems with Cisco Unity Connection, when I connect to this, I see that it shows a message indicating "Cisco Unity Connection can not answer calls. A license violation has ocurred.", when I review th...
Hi, We would like to change Intra-Cluster multiple login behavior from Multiple logins not allowed to Auto Logout. Please suggest does this have any production impact or do we need downtime or any service restart is required. Thanks, Bharath M
I have 2, soon to be 3 CUCM Clusters. i would like to use both centralized TFTP and Cross Cluster Extension Mobility. It does not appear that i can do that with the built in Cisco tools. Dos anyone have a design that accomplishes this either us...
I have a small Pub-Sub UCM cluster in HO and Just brought up a small branch office located in another city with about 10 phones. The small branch doesnot have any UC server or voice gateway onsite. So any voice traffic, to HO extension or PSTN, has t...
Hi AllI am from Saudi Arabia. Is there anyway to play azan (timely alarm to notify prayer time) through IP phones? I am using CUCM 9.1 in my HQ and Standalone CME in Branches. Please respond ASAP.Thank YouAbdul Rasheed
Hi, user doesnt get email alerts when his mailbox is full, moving new messages, Moving Saved Messages or Deleting Messages. we are on 10.5.2 and use Office 365 I dont know where to start troubleshooting i pulled out some logs 02:25:21.929 HDR...
Dear Team, I have a sip trunk between cisco UCM to Huwaei escape PABX,sip trunk between cisco to huwaei is up and call are going,but i am facing one way voice issue,98% calls i an facing the same audio issue. Huwaei extension can hear my voic...
I just connected my iphone to the Cisco and after reboot (automatic reboot) the ext 1 line is orange and the phone is not working. Can't figure out the problem..... No configuration changed, only connected to bluetooth
I erased a Cisco 7940 completely and it is currently running the universal application loader. I would like use TFTP to get the SIP firmware, which I have a copy of, onto the phone. However, when I press the settings button on the phone to try and ch...
Hi guysFirst.. Apologize my english, i know that it's not the best I'm having problems trying to use the Cisco Small Bussines SPA112 with my CME. I use the CME with Cisco IP Phone 7942 and it works fine. Today i tried to add an extension for an analo...
