Hi all, I've got a Cisco 2621XM Router (purchased per the suggestion of CBTNuggets) that I'm trying to use in my home lab. I'm to the point where CCP can discover my router, but I get this far to find that my router isn't supported any further. I'm...
Forum Posts
CUCM 11.5 - I have 150 Dx80s CE ver. I have 2 numbers that I want to add to Favorites on all of them. The numbers are in the Directory and I know I can use the Web interface to mark them as a favorite that way, one by one. I was trying to think of a ...
i have hard time trying to make CUBE send 180 Ringing with SDP after receiving it from my softswitch but CUBE coverts 180 w/SDP to 183 session in progress w/SDP, this cause some callers from ITSPs and PSTN ( calling inbound ) not hearing Ring tone ...
Hi All, Hoping to get some suggestions on a problem I encounter when CUBE is configured for media flow-through (default behaviour) for an OTT SIP trunk. The problem is simple - when I make either an inbound/outbound call I get no audio in either di...
Hello, i am configuring voice-gateways since a while. But the change from 29xx to 43xx routers drives me cracy ... newest issue, i can not get music on hold to work to the PSTN. Situation is like this: CUCM 10.5.2 -> SIP trunk (no MTP) -> 4321 ro...
Hi. Is there a way to configure phones with different time zones in CUCME? Lets say I have some phones in UK and some phones in USA registered in the same CUCME. Thank you.
Hello, I am trying to install cue on ism and receiving the below output ending in error. I have tried this on 2 different ism and 2 different 2901 routers and get the same result, this leads me to believe that I am missing something. I have been ba...
Dear All, One of our customer wants to play message before ring the phones. we have random 400 numbers where he wants to play the message. I know this is possible with UCCX but we have CUCM 11.5, CUC 11.5 and different voice gateways. Any workaroun...
Hi, On a new system I'm building, I have to use the E164 telephone number as the user id. I was hoping that I would be able to set the Alphanumeric User ID setting in Service parameters to false for Extension Mobility. Unfortunately, when I do that...
Resolved! Vmware Migration activity
Hello Everyone, Very Good Morning, VM team planned to upgrade the all VM servers, so currently one of the location having CUCM PUB and SUB in VM server. So, need to know how can i take a necessary precaution before doing the migration. What i...
Hello. CUCM + IMP 11.5, windows jabber client 11.9. NO Unity server. I enable decline button, but he's not work, exactly like in this article in part 2 article https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/200120-...
Dear community I registered IP phone 7821 and 8851 when they successfully registered I could not access the admin setting on the phone because it asks for password, note that I have not configured any password in my CME, Would you please guide me...
Resolved! Adding SIP trunk to CUCM problem
Hi, i have SIEMENS system connecting to CUCM by trunk, i have added one trunk successfully but when i try to add a second one i get this error, how can i add more trunks to the SIEMENS system without this error?
Hello Team, I am facing to configure DHCP option for Alcatel IP phones on Cisco core switch. Alcatel IP phones are Alcatel-Lucent IP touch 4018 Phone, 8028, 8038,8068 and 8088 and Alcatel-Lucent OmniPCX Enterprise IP Media Server. How can you cons...
Hi everyone, I have a setup using two locations: Hub_None and LocationB. I'm using a CUCM 11.x cluster with up to date firmware on my HW conference bridge. The conference bridge is located in Hub_None. Between LocationB to Hub_None, up to 48kbps...
