Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi, We have a CUCM and a 3rd party Voice mail system. We have no issues with voice messages, however we want to enable the MWI indicator in the Cisco IP Phones. From 3rd party voice mail system, we are sending SIP Notify command as "Messages-Waiting:...
I'm looking at the compatibility matrix and I'm a bit confused. There are a number of devices we have that I'm not sure if they are supported. I see 7###G on the list but the 7#### is not specifically listed. For example, we have a bunch of 7962 d...
Is it possible to show "call transferred from", rather than just showing the external number on the destination device? For example, our receptionist will answer a call from outside and transfer the call to our HR secretary who doesn't see that the c...
Hello, I have a few phones I'm re-distributing out of inventory due to a summer intern initiative hiring college kids temporarily. I've re-assigned the phones to the new subscribers but I'm having a problem with the background image. We've kicked off...
Hi, We need to break the login password for both Voice gateway, Analog gateway in our office around 30 + , as the Last admin changed it and we are not able to get in unfortunately. what is the best way to do it without any down time. Regards, Sam
Hello, I am looking for an approach where two numbers can be shown on the physical display when browsing a user directory. Phones are 7821 and CUCM is version 9.1. which has LDAP integration with AD 2008. I know that corporate directory is a given a...
Hi all, We are setting up Intercom for each of users using Extension Mobility. I have come across an oddness that I expect is the predicted outcome but need to change its behaviour. Phone A Extension 0031 Intercom Line 0031 Phone B Extension 0042...
We are having 3 CUCM servers and a Voice logger server( call recording server ). SIP trunk is using for connecting CUCM and Voice logger Server.What we found was that occasionally CUCM did not send the SIP BYE through the SIP Trunk at the end of a re...
I AM NOT THAT FAMILIAR WITH LICENSING. WE CURRENTLY N77-VDC1K9 WHICH INCLUDED 4 VDCS. DO I NEED A ANOTHER LICENSE TO BE ABLE TO CREATE THE VDC? REGARDS, JM
Dear allI have a phone view question, and i had installed unity connection and callmanager version 7.0.1 on vmware and configure phone view feature on callmanager and unity connection .following are configuration1 the callmanager integration with un...
Hi Everyone, We have replaced our 7925 SCCP by 8821 SIP. Everything works perfectely well except the ringback when 8821 dials an internal extension. Here're the senarios: 1)8821 calls an internal number (No ringback tone for 8821) 2)8821 calls the sa...
Dear All, We are running CUCM & CUC on version 8.6. As we know that CUCM version 8 software support going to EOS by july 31. I needs to know recommendable upgrade path on the platform UCS C 220 M3 server. I have few concern before performing a upgra...
hi we have a couple of cisco 8945 (SCCP) IP phone registered on call manager version 10.5. When someone tries to make any call (internal or external) the call is forwarded to one single external number which was earlier configured as a short dial co...
Hi there, I have problem with CME. As mentioned below. The phones currently show "Call from 911" as the caller-id for all calls from the external line. I need help. Reagrds MAS
Hi I am working on a project to move a cluster running on version 8 to version 9 site by site... Version 9 cluster is already here with many branch offices on it. Now we are trying to move the branch offices connected to the version 8 cluster to the ...
