cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
636
Views
0
Helpful
2
Replies

BE6000 Boot from SCU Partition on Flexfalsh to run server diagnostics.

Joey De Wiele
Level 1
Level 1

Hey,

I notice that the BE6000s have the "Onboard SCU Storage Support" BIOS option is set to "Disabled" making it impossible to boot from the Flexflash SCU partition to run diagnostics before deployment. If I set this to "Enabled", run my diagnostics, and then set it back to "Disabled" am I breaking some special "BE Rule"? Or is it recommended that I download the latest version of the SCU ISO and boot using the KVM virtual media?

Thanks,

Joey

1 Accepted Solution

Accepted Solutions

Always good to state on the latest FW and no you not breaking any it is good to make sure all is 100%

Sent from Cisco Technical Support iPhone App

Best Regards

View solution in original post

2 Replies 2

Always good to state on the latest FW and no you not breaking any it is good to make sure all is 100%

Sent from Cisco Technical Support iPhone App

Best Regards

Excellent and Thank You!!!!