07-18-2015 11:35 PM - edited 03-17-2019 03:41 AM
Guys,
I am going to implement BE6S(2921) Router with in built server,this bundle includes Voice cards & UC applications all in one...
Since it's my first deployment for BE6KS is there any new step by step doccument available?
07-19-2015 05:51 AM
Hi Siva,
Plz check the following post
https://supportforums.cisco.com/discussion/12450581/typo-be6000s-quick-start-guide
07-20-2015 04:09 AM
Thanks for ur info...which really helpful for me
[+5] Monish
07-20-2015 04:17 AM
Good to know it Siva, its a bit strange that the quick start guide or deployment guide for BE6KS does not come up when we search on google.
Manish
07-30-2015 08:57 AM
Hi Manish,
Can you brief me the steps which you have taken while configuring BE6KS. I have couple of BE6KS Implementations waiting around, appreciate your help in getting the steps involved to configure BE6KS.
All i came to know is that Router has a sample configuration and I am not sure how do we to set it up, so that UCS E160D with CUCM as an application will communicate through 2921.
Thanks in advance,
Solomon.
07-30-2015 04:54 PM
Hi Solomon
This should give you a start
http://www.cisco.com/c/en/us/support/unified-communications/business-edition-6000/products-installation-guides-list.html
HTH
07-31-2015 12:08 AM
Thank you Wilson for the link. I do know implementing BE6K Enterprise edition be it MD or HD. All I need to know how we do it for the newly emerged solution BE6KS. In Cisco, apart from Quick Start Guide, I did not find any other document related to this Solution.
Solomon.
01-08-2016 06:18 PM
Yes, the Be6ks is a little different. I do not use the preconfigured version because we have a standard base config that we use for all of our installs. have gone through about 3 BE6Ks installs and have trouble with each one, if we could get a guide with the differences at least that would be great. Thanks!
01-08-2016 06:29 PM
Hi,
you can refer the link
http://www.cisco.com/c/en/us/products/servers-unified-computing/ucs-e-series-servers/models-comparison.html
http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-e-series-servers/qa_c67-625001.pdf
regds,
aman
01-08-2016 08:19 PM
Thank you Aman, but I meant a configuration guide. There are config guides for a regular be6k everywhere but for the s there is nothing on Google. There are a few extra steps that need to be taken on the s for it to work correctly in the network and for the 2921 to communicate with the server correctly.
01-08-2016 11:55 PM
Hi Randle,
you can refer the link
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/e/2-0/gs/guide/b_2_0_Getting_Started_Guide/b_2_0_Getting_Started_Guide_chapter_0101.html
regds,
aman
08-28-2015 07:57 AM
Hello Shiva,
Have you Installed BE6K S at your site. If yes can you please get me the steps around it, apart from Quick Start Guide. I have one Implementation scheduled next month. ANy Help much Appreciated.
Regards,
Solomon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: