07-01-2012 07:52 PM - edited 03-16-2019 11:57 AM
Hi there, I have setup 7962 with one expansion module for a branch office. all user's extension has been configured as SD in the Expansion module. it works fine. Now new receptionist ask for the BLF on the button of Expansion module, so when user is in a call, she can see the light on and no need to forward call to them. Please advice if there is any features available in CUCM 8.6 that I can use to achive those.
Thanks
Roy
Solved! Go to Solution.
07-01-2012 08:22 PM
You should be able to configure BLF SD to achieve this.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmfeat/fsprsnc.html#wp1155652
Sent from Cisco Technical Support iPhone App
07-01-2012 08:22 PM
You should be able to configure BLF SD to achieve this.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmfeat/fsprsnc.html#wp1155652
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: