I have Cisco 3925 with CUCME 10.5 and several CP-7821 SIP phones.
I want use the presence service with blf monitoring for speed-dial.
I use blf-speed-dial command in voice register pool 1 and speed-dial appears on second line button of phone, but monitoring on that button doesn't working.
(BLF monitoring for call lists is working. I can see status in missed call list. But what I want is BLF monitoring for speed-dial. May be blf monitoring for speed-dial works only for SCCP?)
This is my config:
voice register dn 1 number 7299 allow watch name 7299 shared-line max-calls 6 label 7299
voice register dn 12 number 7009 allow watch pickup-group 01 name 7009 shared-line max-calls 6 label 7009
voice register pool 1 busy-trigger-per-button 1 id mac F09E.636F.ADAE session-transport tcp type 7821 number 1 dn 1 presence call-list dtmf-relay sip-notify voice-class codec 3 description 7299 no vad blf-speed-dial 1 7009 label "test" device
voice register pool 12 busy-trigger-per-button 2 id mac F09E.636F.AD36 session-transport tcp type 7821 number 1 dn 12 dtmf-relay sip-notify voice-class codec 3 description 7009 no vad
Did you ever happen to straighten this out? I am having this problem also.... Everything was working fine for years with no changes and now all of a sudden my blf speed dials on my 9951 phones are acting only like speed dials.
The effort to search the best and simplest explanation of complex topic is so harder and passionate. You test, you analyze and you imagine the best schema to explain it, even the size of you drawing is taken into consideration.
This is what I did f...
MARS Emergency Alerts helps an organization to create, distribute and manage enterprise wide notification to all employees in the enterprise in a systematic and efficient manner.The application allows alerts to be broadcasted to Cisco IP phones by the app...
The acronym "STUN" stands for two definitions with two different meanings as follows:
STUN - Simple Traversal of User Datagram Protocol (UDP) ---> RFC 3489 published in 2003 - works only with static NAT to establish a direct connectivity between...
Inbound CSS and Rerouting CSS with Cisco Unity Connection Transfer rules:Release to Switch: this type of transfer uses the SIP Refer method to reroute the call to the specified extension, it is sent in dialog in other words in the existing SIP conversatio...