05-01-2013 08:07 AM - edited 03-16-2019 05:05 PM
We have CUCM 7.1.5.20000-6 and use MGCP. As I recall 8 has a feature to block using translation patterns but not sure if this is possible using versions lower than 8.
So just looking to confirm if CUCM 7.1.5.20000-6 using MGCP can block a call based on the calling party number.
Solved! Go to Solution.
05-01-2013 08:15 AM
Hi Nishant,
You are most correct my friend, with MGCP you need a minimum
of CUCM 8.x
From Dan @ Cisco for MGCP
https://supportforums.cisco.com/docs/DOC-18367
Cheers!
Rob
"Talk about a dream
Try to make it real"
- Springsteen
05-01-2013 08:18 AM
Hi ,
I think u are looking for Route Next Hop by Calling Party number .
regds,
aman
05-01-2013 08:15 AM
Hi Nishant,
You are most correct my friend, with MGCP you need a minimum
of CUCM 8.x
From Dan @ Cisco for MGCP
https://supportforums.cisco.com/docs/DOC-18367
Cheers!
Rob
"Talk about a dream
Try to make it real"
- Springsteen
05-01-2013 08:18 AM
Hi ,
I think u are looking for Route Next Hop by Calling Party number .
regds,
aman
05-01-2013 09:53 AM
That's what I was afraid of.
Thanks for confirming - back to the drawing board!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: