We have a BRI connected to a cisco router via and alcatel omnipcx.
ISDN BRI0/2/0:0 interface
dsl 0, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 1. Layer 3 output may not apply
ISDN BRI0/2/1:0 interface
dsl 1, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 1 CCBs = 0
The Free Channel Mask: 0x80000003
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 2. Layer 3 output may not apply
ISDN BRI0/2/2:0 interface
dsl 2, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 2 CCBs = 0
The Free Channel Mask: 0x80000003
ISDN BRI0/2/3:0 interface
dsl 3, interface ISDN Switchtype = basic-net3
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 3 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
When I run the logs this is what I am seeing
Oct 20 14:25:32.294: ISDN BR0/2/1:0 Q921: User RX <- SABMEp sapi=0 tei=0
Oct 20 14:25:32.294: ISDN BR0/2/1:0 Q921: S4_SABME: BACKHAULED & vsc_wants_L2_up = FALSE
Oct 20 14:25:34.294: ISDN BR0/2/1:0 Q921: User RX <- SABMEp sapi=0 tei=0
Oct 20 14:25:34.294: ISDN BR0/2/1:0 Q921: S4_SABME: BACKHAULED & vsc_wants_L2_up = FALSE
Oct 20 14:25:35.294: ISDN BR0/2/1:0 Q921: User RX <- SABMEp sapi=0 tei=0
Oct 20 14:25:35.295: ISDN BR0/2/1:0 Q921: S4_SABME: BACKHAULED & vsc_wants_L2_up = FALSE
I cant seem to find a solution.
