cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
201
Views
0
Helpful
1
Replies

BRI Activation issue

KyleMayer5150
Beginner
Beginner

We have a BRI connected to a cisco router via and alcatel omnipcx. 

 

ISDN BRI0/2/0:0 interface
dsl 0, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003

%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 1. Layer 3 output may not apply

ISDN BRI0/2/1:0 interface
dsl 1, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 1 CCBs = 0
The Free Channel Mask: 0x80000003

%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 2. Layer 3 output may not apply

ISDN BRI0/2/2:0 interface
dsl 2, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 2 CCBs = 0
The Free Channel Mask: 0x80000003
ISDN BRI0/2/3:0 interface
dsl 3, interface ISDN Switchtype = basic-net3
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 3 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0

 

When I run the logs this is what I am seeing 

 

Oct 20 14:25:32.294: ISDN BR0/2/1:0 Q921: User RX <- SABMEp sapi=0 tei=0
Oct 20 14:25:32.294: ISDN BR0/2/1:0 Q921: S4_SABME: BACKHAULED & vsc_wants_L2_up = FALSE
Oct 20 14:25:34.294: ISDN BR0/2/1:0 Q921: User RX <- SABMEp sapi=0 tei=0
Oct 20 14:25:34.294: ISDN BR0/2/1:0 Q921: S4_SABME: BACKHAULED & vsc_wants_L2_up = FALSE
Oct 20 14:25:35.294: ISDN BR0/2/1:0 Q921: User RX <- SABMEp sapi=0 tei=0
Oct 20 14:25:35.295: ISDN BR0/2/1:0 Q921: S4_SABME: BACKHAULED & vsc_wants_L2_up = FALSE

 

I cant seem to find a solution. 

1 Reply 1

KyleMayer5150
Beginner
Beginner

attached is config

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers