cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1005
Views
5
Helpful
1
Replies

BRI config with CME 4.3

amitbatra
Level 1
Level 1

Hi ,

i have configured FXO interface with CME for PSTN outbound and inbound calls.

How to configure BRI for outbound calls. can anyone provide me a sample config.

regards

1 Reply 1

cg100668
Level 1
Level 1

Hi,

Please see some sample configs below:

interface BRI0/1/0

no ip address

isdn switch-type basic-net3

isdn not-end-to-end 56

isdn point-to-point-setup

isdn incoming-voice voice

isdn sending-complete

isdn static-tei 0

dial-peer voice 1 pots

description ** BRI pots dial-peer **

translation-profile incoming INCOMING

preference 1

destination-pattern 9T

incoming called-number .

direct-inward-dial

port 0/1/0

!

Hope this will help.

Regards,

Chandrasen

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: