09-19-2011 05:51 AM - edited 03-16-2019 07:03 AM
Is there a way to disable (in Bulk or Enterprise-Wide) the Enbloc Dialing setting in CUCM 7.x?
Solved! Go to Solution.
09-22-2011 12:59 PM
Hi
When you use BAT, try just selecting phones of a type (e.g. 7962) that you KNOW has the property. I recall if you select 'all' phones it won't display properties not common to all the phone types in the selection.
Regards
Aaron
09-21-2011 06:58 AM
hello,
what version of 7.x you are running.
i know you can do it from BAT tool in cucm 8 and in some version of 7.
once you tell me the full version i'll be able to confirm you.
thanks,
Vipul Jindal
09-22-2011 12:56 PM
Exact version is:
7.1(5)bSU4
< or >
7.1.5.33900-10
I don't see it in the BAT but I would love some guidance.
Also, is there a way to set Enbloc Dialing to 'Disable' by default? It's not an option in the "Common Device Configuration" nor in the Phone Templates.
Thanks in advance for any assistance.
09-22-2011 12:59 PM
Hi
When you use BAT, try just selecting phones of a type (e.g. 7962) that you KNOW has the property. I recall if you select 'all' phones it won't display properties not common to all the phone types in the selection.
Regards
Aaron
09-22-2011 01:03 PM
That was it - thank you very much!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide