cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8177
Views
20
Helpful
5
Replies
Beginner

C200 M2 - Make the Beeping Stop

Our C200 M2 has a failed drive (replacement on the way). How do I make this thing stop beeping in the meantime? It's driving everyone insane.

Everyone's tags (6)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Re: C200 M2 - Make the Beeping Stop

Yep, Thanks for the reply. I finally found the answer here: http://www.cisco.com/en/US/products/ps10493/products_tech_note09186a0080c0e461.shtml

Protip: remember to hit next under the controller properties to get to the screen where you can disable the alarm.

Silence is golden! lol

Thanks guys

View solution in original post

5 REPLIES 5
Highlighted
Beginner

C200 M2 - Make the Beeping Stop

Having the same issue.  TAC said the only way was to reboot the server and change one of the options.

Highlighted

C200 M2 - Make the Beeping Stop

Hi, I have one of these servers doing the same thing. Going to call it in, but what/where is the setting to make it stop, not seeing it in BIOS and wondering if it's somewhere else. Thanks!

Highlighted
Beginner

C200 M2 - Make the Beeping Stop

The audio alarm setting is normally in the onboard config of the RAID controller, which is accessible using some keyboard combination during server bootup (after BIOS, before OS loads).

Highlighted

Re: C200 M2 - Make the Beeping Stop

Yep, Thanks for the reply. I finally found the answer here: http://www.cisco.com/en/US/products/ps10493/products_tech_note09186a0080c0e461.shtml

Protip: remember to hit next under the controller properties to get to the screen where you can disable the alarm.

Silence is golden! lol

Thanks guys

View solution in original post

Highlighted
Hall of Fame Community Legend

C200 M2 - Make the Beeping Stop

Thanks for posting back Anthony +5

This will likely save some migraines out there.

Cheers!

Rob

"A smile relieves a heart that grieves" 

- Stones

CreatePlease to create content