C2901, MGCP and SRTP ?

[Cisco Service ENTIRETEC]

Hello,

i have on Router 2901 is working as a PSTN Gateway with MGCP to UCM 8.6.2. All it's working fine. But i cannot enter the connand:

mgcp package-capability srtp

dt-ccm-sbhkw-vgw-001(config)#mgcp package-capability ?

  as-package      Select the Announcement Server Package

  atm-package     Select the ATM Package

  dtmf-package    Select the DTMF Package

  fm-package      Select the FM Package

  fxr-package     Select the FXR Package

  gm-package      Select the Generic Media Package

  hs-package      Select the Handset Package

  it-package      Select the IT Package

  line-package    Select the Line Package

  mdr-package     Select the MDR Package

  mf-package      Select the MF Package

  pre-package     Select the PRE Package

  res-package     Select the RES Package

  rtp-package     Select the RTP Package

  script-package  Select the Script Package

  sst-package     Select the SST Package

  trunk-package   Select the Trunk Package

The IOS is c2900-universalk9-mz.SPA.151-3.T1.bin. I tried other Version within T-Train. Alos teh UC-Feature are licensed. Why ist the srtp Feature not available?

thx and regards

Ronny

[Aman Soi]

Hi Ronny,

I think u should have a security image installed on ISR G2 router since on ISR series u require Advanced IP Services or Advanced Enterprise Services image.

can u try loading a security image with Eval licnese?

regds,

aman

[Cisco Service ENTIRETEC]

Hi Aman,

with Universal Image in Train 15.x we have no distiction between Advanced IP and Base IP etc. The UC Licenses are enabled, security not. How can i enable shis?

regards

Ronny

[Aman Soi]

Hi Ronny,

You need to have an image which has UC,Data and Security enabled.Please find the snapshot which I have captured from Cisco Feature NAvigator.

You can get the Evaluation security licnese by cisco.com/go/license by enetring Serial number and UDI of router.Thereafter, u need to buy from Cisco.

You can just the desired command.

regds,

aman

[Aman Soi]

Hi Ronny,

In addition to what I have said,you can activate the licenses using this URL?

http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.html

regds,

aman