c2911 with UCS-E140S-M2/K9 can this be removed while 2911 is still up and running

[tdudas]

Hi Guys,

I have a c2911 router with a UCS-E140S-M2/K9 module inserted.

I want to power the module OFF and remove it from the router.

I can power the module OFF via the CIMC port, but can the module be removed from the c2911 router without powering the router OFF?

>> The router has DSP resources registered with CUCM, so it would affect the service if the c2911 also needs to be powered OFF just to remove the E140 module.

Many thanks,

Tibor

[R0g22 · Accepted solution]

OIR is supported on 3900 and 4k routers only. For 29XX, the router needs to be powered off before module un-seat to prevent any damage to the box.