How i can call directly without pressing 0 or 9 on the phone ?? i have h323 protocol
this is POTS configuration in My gateway :
dial-peer voice 11 pots
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
All route Pattern
9.18xxxxxx without predot
how i can do it without pressing 9 or 0 , just remove 9 from gateway and dial-peer and thats all ???
Second Question is :
I have Fake Extenstions (not DID extension) , i need somebody has a fake extenstion call out side , will do through some DID extesntion , i will use EXternal mask or translation pattern or num-exp , Note : SIP trunk using from TElco side (not E1 or FXO ) from my side
fake extention : 401 , when call out side. go through
For the first Q: Yes, removing 9 from the dial-peer will do the trick, but this is not recommended as when you have a pattern with T, it means match any number of digits, which means if anyone would dial an incoorect number (Internal Ext) the router would try to send a call through the voice gateway. If you plan to use have call routing seting without using a 9 or 0 dial, you should have dial-peers setup to match specific 10 digit for LD and 7 digit for Local starting with [2-9]. You'd need a similiar dial-peer for Intl calls.
Yes, you can do a num-exp compared to translation-rule. Though if you want to have a better control on the translation it you might want to use translation-rule. A thread you could read to get more info on both of them:
The 2021 IT Blog Awards, hosted by Cisco, is now open for submissions. Submit your blog, vlog or podcast by Friday, December 3.
To learn what's new in this year's competition or to gain insights into the judging considerations, check out t...
Greetings, Wanted to share a few lessons learned while migrating from a distributed to centralized IMP deployment. Our current setup included many CUCM/IMP distributed clusters with centralized Expressway server for MRA login. We did not wish to perf...
Parsec's Cisco UCCE/PCCE CC Connector application for CRM works as a bridge between the CRM and Cisco UCCE/PCCE CC solution.The CRM can be any cloud based CRM like Salesforce (SFDC), ServiceNow ,MS Dynamics or a 3rd party CRM.The CRM user/Agent will have ...
It’s a feature which allows CUCM to determine whether the phone is in its home location or a roaming station.By enabling this feature users can roam from one site to another site and acquire the site-specific settings such as Codecs, MRGL, Call rout...