04-05-2016 05:29 AM - edited 03-17-2019 06:28 AM
Hello,
Can one of you explain call flow process via SIP, H.323,MGCP
04-05-2016 05:39 AM
Anand,
SIP
https://supportforums.cisco.com/document/71131/basic-sip-call-flows-troubleshooting-commands
H323
http://docwiki.cisco.com/wiki/Cisco_IOS_Voice_Troubleshooting_and_Monitoring_--_H.323-Related_Standards#Table:_H.225_Call_Setup_Messages
https://supportforums.cisco.com/discussion/12599946/call-flow-between-sipsccp-phone-which-registered-cucm-h323-gateway
mgcp
http://flylib.com/books/en/2.285.1.27/1/
SCCP
https://supportforums.cisco.com/document/138351/unified-communications-call-flow-enterprise-network
04-05-2016 08:44 AM
Similar discussion on support community:
https://supportforums.cisco.com/discussion/12081716/difference-between-h323mgcpsipsccp
I would suggest to refer to the following book for an excellent detailed explanation of each of the above protocols:
http://www.ciscopress.com/store/troubleshooting-cisco-ip-telephony-9781587050756
~Amit
Please rate if helpful
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide