call forward b2bua all to ID og PickupGroup (CME12.5)

[DemeT]

I'm facing the following problem,:

When an incoming call to telephone A, it is possible for telephone B to capture the call.(PickUP Calls)

Once the call is captured on telephone B, the display of telephone A shows the line "Forwarded to 27" where 27 the number of the pickup-group.

At the configuration level it appears:

Phone A:
voice register dn 6
 number 1006
 call-forward b2bua all 27


and I must deny the line at level dn or telephone level by pressing the CFwd softkey

Call Manager Express Version 12.5 (this did not show it in the previous verison CME 12.2)


Any ideas, ?

Thanks for your support.
regards

[Davide Fiumi]

Same frustrating problem here, do someone know how to solve it?

[Davide Fiumi]

Downgraded the CME 12.1 with the IOS on 4321:

Release Fuji-16.8.1
isr4300-universalk9.16.08.01.SPA.bin

problem is solved!

So let's not use CME 12.5 'til they solve this!!!

[Salvador Antonio Quintanilla Mendoza]

How do you resolve this? i have the same issue