cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1448
Views
0
Helpful
12
Replies

Call Forwarding - High Traffic

CUCM |IP Phone| Call forwarding to PSTN |mobile number| showing "High Traffic Try Again Later"!

12 Replies 12

What is your type of PSTN connection?

The number is correctly?

Only call forward thats not work?

Regards

Leonardo Santana

Regards
Leonardo Santana

*** Rate All Helpful Responses***

We have E1 PSTN connection...

The number is correct...

Internal call forward is working but call forward to PSTN |mobile|  is not working...

Thanks..

Chris Deren
Hall of Fame Master Hall of Fame Master
Hall of Fame Master

Is it H323? If so can you post your dual peer config?

Sent from Cisco Technical Support iPhone App

dial-peer voice 1 pots

translation-profile incoming VGW-in

incoming called-number .

direct-inward-dial

!

dial-peer voice 8000 voip

description System Extensions

destination-pattern 8...

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

codec g711ulaw

!

dial-peer voice 7000 voip

description 7 Range Extensions

destination-pattern 71[349].

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

codec g711ulaw

!

dial-peer voice 71380 pots

description ERP FAX

destination-pattern 7138T

port 0/3/0

!

dial-peer voice 20000 pots

trunkgroup Commscope

description Commscope Outgoing Lines

destination-pattern 9T

!

dial-peer voice 70000 pots

trunkgroup STC-BT

description BT Users-All Calls

destination-pattern 66T

!

dial-peer voice 80060 voip

description MeMega IVR

destination-pattern 8006

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

!

dial-peer voice 1759 pots

description POS Number for MeMega Showroom

destination-pattern 881759

port 0/3/1

forward-digits 4

!

dial-peer voice 1500 voip

description UCM Extensions

destination-pattern 1[154]..

session target ipv4:172.16.35.20

codec g711ulaw

!

dial-peer voice 6900 pots

description Nortel E1 Range

destination-pattern 69..

port 2/1:0

forward-digits all

!

dial-peer voice 70010 pots

description Outgoing MeMega All Users

destination-pattern 88T

port 1/0:0

!

dial-peer voice 7020 voip

destination-pattern 7001

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

codec g711ulaw

!

dial-peer voice 15000 pots

description Outgoing for Cisco and Nortel Users

destination-pattern 55T

fax rate disable

port 1/0:0

!

dial-peer voice 5500 voip

destination-pattern 700T

session target ipv4:172.16.35.20

codec g711ulaw

!

dial-peer voice 5600 pots

destination-pattern 56T

port 0/2/0

!

dial-peer voice 70291759 pots

destination-pattern 7029T

port 0/3/3

!

dial-peer voice 70301759 pots

destination-pattern 7030T

port 0/3/2

!

dial-peer voice 70311759 pots

destination-pattern 7031T

port 0/3/1

!

dial-peer voice 70321759 pots

destination-pattern 7032T

port 0/2/2

!

dial-peer voice 7129 voip

destination-pattern 7129

session target ipv4:172.16.35.20

codec g711ulaw

fax-relay ecm disable

fax rate disable

!

dial-peer voice 7044 voip

description Memega FAX

destination-pattern 7044

session target ipv4:172.16.35.20

dtmf-relay rtp-nte

codec g711ulaw

!

  dial-peer voice 77770 voip

description Cisco Call Center Nortel

destination-pattern 7777

session protocol sipv2

session target ipv4:172.16.2.74

codec g711alaw

!

dial-peer voice 6992 voip

destination-pattern 6917

session target ipv4:172.16.12.202

session transport udp

voice-class codec 2

fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none

no vad

dial-peer voice 550001 pots

forward-digits 4

!

dial-peer voice 90001 pots

destination-pattern 55.......,,,,,,,,,,T

fax rate disable

port 1/0:0

!

dial-peer voice 699251 pots

service faxd

shutdown

incoming called-number 6992

direct-inward-dial

!

dial-peer voice 66995522 voip

destination-pattern 6992

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

codec g711ulaw

fax rate disable

!

dial-peer voice 699253 voip

service faxd

shutdown

incoming called-number 4555

!

dial-peer voice 719444 voip

destination-pattern 7199

session protocol sipv2

session target ipv4:172.16.35.20

dtmf-relay rtp-nte

codec g711ulaw

clid network-provided

!

dial-peer voice 7194 voip

description to microsoft communication server

destination-pattern 57....

session protocol sipv2

session target ipv4:172.16.100.111

session transport tcp

codec g711ulaw

clid network-provided

!

dial-peer voice 69055 voip

description to microsoft communication server Conference

translation-profile outgoing MSConference

destination-pattern 6905

session protocol sipv2

session target ipv4:172.16.100.240:5068

session transport tcp

dtmf-relay rtp-nte

codec g711ulaw

!

dial-peer voice 8794 voip

description BTAT IVR

destination-pattern 8794

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

!

dial-peer voice 6984 voip

description MVA for 7199

destination-pattern 6984

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

!

dial-peer voice 69840 pots

service ccm

incoming called-number 6984

direct-inward-dial

dial-peer voice 17777 pots

description POTS FOR DOKKI

destination-pattern 605........

port 0/1/1

forward-digits 10

!

dial-peer voice 18888 pots

description POTS FOR NILE CITY

destination-pattern 66T

port 0/0/1

forward-digits 10

!

dial-peer voice 6969 voip

description ERP Support 1600

destination-pattern 6969

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

codec g711ulaw

Your destination-pattern destination-pattern 71[349]. is improperly formatted which will cuase this error (I know I've been there :-))

The syntex needs to be 71[3,4,9].

HTH, please rate all useful posts!

Chris

Chris

Your recommended solution seems to be not useful!

can you post the output of debug voice ccapi inout and your try to forward the call to cell phone number.

Regards

Leonardo Santana

Regards
Leonardo Santana

*** Rate All Helpful Responses***

hi Marlo,

Possible to do a debug isdn q931? is the call successful sent to the GW?

TIA

actually, we are using E1-CAS and debug isdn q931 is not supported, and when i used [terminal monitor | debug voice ccapi inout] commands ...strange..no output..

Mario inside the Directory Number the CSS of Call Forward All has the permission to reach cell phones numbers route pattern?

Regards

Leonardo Santana

Regards
Leonardo Santana

*** Rate All Helpful Responses***

i checked the CSS and there is mobile access|privilege..

Problem Solved :


Under CUCM H.323 Gateway Configuration:

Call Routing Information - Outbound Calls

Calling Party Selection* Originator

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers