cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2483
Views
0
Helpful
20
Replies

Call from PSTN

MarcoM
Level 1
Level 1

Hi all,

when receive a call from PSTN to the extension 30 (for example) call redirect always to extension 20 and I can not call directly to internal numbers.

can anyone help me please?

In attach most important parts of the configuration.

Thanks in advance.

Debug "debug isdn q931":

May 27 17:19:16.557: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8  callref = 0x002E

        Sending Complete

        Bearer Capability i = 0x8090A3

                Standard = CCITT

                Transfer Capability = Speech

                Transfer Mode = Circuit

                Transfer Rate = 64 kbit/s

        Channel ID i = 0xA9838D

                Exclusive, Channel 13

        Calling Party Number i = 0x00A3, N/A

                Plan:Unknown, Type:Unknown

        Called Party Number i = 0xA1, '331234530'

                Plan:ISDN, Type:National

May 27 17:19:16.557: ISDN Se0/0/0:15 Q931: Received SETUP  callref = 0x802E callID = 0x048E switch = primary-net5 interface = User

May 27 17:19:16.565: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8  callref = 0x802E

        Channel ID i = 0xA9838D

                Exclusive, Channel 13

May 27 17:19:16.565: ISDN Se0/0/0:15 Q931: TX -> ALERTING pd = 8  callref = 0x802E

        Progress Ind i = 0x8188 - In-band info or appropriate now available

May 27 17:19:26.513: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8  callref = 0x002E

        Cause i = 0x8090 - Normal call clearing

        Progress Ind i = 0x8088 - In-band info or appropriate now available

May 27 17:19:26.513: ISDN Se0/0/0:15 Q931: TX -> RELEASE pd = 8  callref = 0x802E

May 27 17:19:26.569: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x002E

20 Replies 20

I dont understand. You said you are calling from outside. That is you are dialling externally this number from outside. SO what do you mean by you cant call external number

0331754535

The trace I looked at..

calling number is 2511403

called number is 3317545

are you saying called number should be 331754535?

Please rate all useful posts

Right..called number should be 331754535 but when dial digits on my personal phone 3+3+1+7+5+4+5 start call...

but I have not finished entering the number 35.

Is your personal phone a mobile?. I am not sure why this is happening..you need to find out if you are dialling the correct number? Or is your personal phone on the ccme router?

Please rate all useful posts

Is an analogic phone (home).

With mobile phone if dial number 331754535 and then I start the call reach the desired extension but from analogic phone dont work...

So your system does not have any problem then. Its working. The problem is with your home phone. This forum cant help you with this. The analogic phone is not cisco phone. You need to contact the vendor for the phone...

Pls rate all useful posts

Please rate all useful posts

Thanks a lot....