Hi all,
when receive a call from PSTN to the extension 30 (for example) call redirect always to extension 20 and I can not call directly to internal numbers.
can anyone help me please?
In attach most important parts of the configuration.
Thanks in advance.
Debug "debug isdn q931":
May 27 17:19:16.557: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x002E
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9838D
Exclusive, Channel 13
Calling Party Number i = 0x00A3, N/A
Plan:Unknown, Type:Unknown
Called Party Number i = 0xA1, '331234530'
Plan:ISDN, Type:National
May 27 17:19:16.557: ISDN Se0/0/0:15 Q931: Received SETUP callref = 0x802E callID = 0x048E switch = primary-net5 interface = User
May 27 17:19:16.565: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0x802E
Channel ID i = 0xA9838D
Exclusive, Channel 13
May 27 17:19:16.565: ISDN Se0/0/0:15 Q931: TX -> ALERTING pd = 8 callref = 0x802E
Progress Ind i = 0x8188 - In-band info or appropriate now available
May 27 17:19:26.513: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x002E
Cause i = 0x8090 - Normal call clearing
Progress Ind i = 0x8088 - In-band info or appropriate now available
May 27 17:19:26.513: ISDN Se0/0/0:15 Q931: TX -> RELEASE pd = 8 callref = 0x802E
May 27 17:19:26.569: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x002E
